Ipv6

am I crazy (don't answer that)? I am trying to setup 6to4 tunneling but I cannot set up ipv6 addresses on any of my ints.

I am using these commands

MATRIX(config-if)#exit
MATRIX(config)#ipv6 unicast-routing
MATRIX(config)#int s0
MATRIX(config-if)# ipv6 address 2001:db8:3c4d:1:0260.d66ff.FE73.1987/ 64

I pulled this command directly out of the the book and my ios version should support ipv6

sh ver
Cisco IOS Software, C1700 Software (C1700-ADVIPSERVICESK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 24-Apr-07 12:56 by prod_rel_team

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

MATRIX uptime is 2 hours, 15 minutes
System returned to ROM by power-on
System image file is "flash:c1700-advipservicesk9-mz.124-13b.bin

Am i missing something?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

jason_lunde

knwminus wrote: »
am I crazy (don't answer that)? I am trying to setup 6to4 tunneling but I cannot set up ipv6 addresses on any of my ints.

I am using these commands
MATRIX(config-if)#exit
MATRIX(config)#ipv6 unicast-routing
MATRIX(config)#int s0
MATRIX(config-if)# ipv6 address 2001:db8:3c4d:1:0260.d66ff.FE73.1987/ 64 
I pulled this command directly out of the the book and my ios version should support ipv6
sh ver
Cisco IOS Software, C1700 Software (C1700-ADVIPSERVICESK9-M), Version 12.4(13b), RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 24-Apr-07 12:56 by prod_rel_team

ROM: System Bootstrap, Version 12.2(7r)XM2, RELEASE SOFTWARE (fc1)

MATRIX uptime is 2 hours, 15 minutes
System returned to ROM by power-on
System image file is "flash:c1700-advipservicesk9-mz.124-13b.bin
Am i missing something?

Try using colons instead of periods in that address and you may be g2g

kalebksp

ipv6 address 2001:db8:3c4d:1:0260.d66ff.FE73.1987/ 64

Is this a copy and paste? There are periods in the ipv6 address and a space between the / and 64. I'm not an IPv6 expert, but that doesn't look right to me.

Bl8ckr0uter

jason_lunde wrote: »

Try using colons instead of periods in that address and you may be g2g

Will try later.

kalebksp wrote: »
ipv6 address 2001:db8:3c4d:1:0260.d66ff.FE73.1987/ 64
Is this a copy and paste? There are periods in the ipv6 address and a space between the / and 64. I'm not an IPv6 expert, but that doesn't look right to me.

It is a copy paste.

Bl8ckr0uter

kalebksp wrote: »
ipv6 address 2001:db8:3c4d:1:0260.d66ff.FE73.1987/ 64
Is this a copy and paste? There are periods in the ipv6 address and a space between the / and 64. I'm not an IPv6 expert, but that doesn't look right to me.

I took the periods out of the address and removed the space and it worked. I copied this from a book so it must be a typeo.