Options
Eigrp
gaby_978
Member Posts: 222
in CCNA & CCENT
Hey guys
I am unable to configure EIGRP between a 2600 and a 2513 series router. The 2600 takes all the EIGRP configs fine. The 2500 take all the configs while you are configuring EGIRP but once done and I run a sh run, no EIGRP configs appear. Had this issue before when i had my lab firs setup and had to run OSPF instead. Any suggestions?????
Thanks
I am unable to configure EIGRP between a 2600 and a 2513 series router. The 2600 takes all the EIGRP configs fine. The 2500 take all the configs while you are configuring EGIRP but once done and I run a sh run, no EIGRP configs appear. Had this issue before when i had my lab firs setup and had to run OSPF instead. Any suggestions?????
Thanks
"If you spend too much time thinking about a thing,
you'll never get it done"
you'll never get it done"
Comments
-
Optionsgaby_978 Member Posts: 222Here is the sh ver
bbrtr3#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3000 Software (IGS-DR-L), Version 11.1(17), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1998 by cisco Systems, Inc.
Compiled Tue 27-Jan-98 12:41 by phester
Image text-base: 0x03030DD0, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB1, PLATFORM SPECIFIC RELEASE SOFTWARE (fc1)
bbrtr3 uptime is 1 hour, 32 minutes
System restarted by power-on
System image file is "flash:igs-dr-l.111-17", booted via flash"If you spend too much time thinking about a thing,
you'll never get it done" -
Optionskalebksp Member Posts: 1,033 ■■■■■□□□□□That is a very old IOS, my suggestion would be to get a more recent IOS and see if it works properly.
-
Optionsgaby_978 Member Posts: 222I know but at this time I dont have access to a newer IOS"If you spend too much time thinking about a thing,
you'll never get it done" -
OptionsBl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□I know but at this time I dont have access to a newer IOS
It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol? -
Optionselegua Member Posts: 282I know but at this time I dont have access to a newer IOS
Hi gaby,
How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you. -
Optionsjovan88 Member Posts: 393shot in the dark, do you have the ip routing command entered?
* sorry just saw you had ospf happening,
try seeing if the oldschool IGRP works -
OptionsBl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□shot in the dark, do you have the ip routing command entered?
* sorry just saw you had ospf happening,
try seeing if the oldschool IGRP works
That was what I was thinking as well but if EIGRP works, IGRP will not. 11.1 should support EIGRP according to cisco. -
Optionsgaby_978 Member Posts: 222It should work. EIGRP is supported by 11.X. How are you configuring EIGRP? More importantly why are you configuring eigrp? Can you use another routing protocol?
I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes."If you spend too much time thinking about a thing,
you'll never get it done" -
Optionsgaby_978 Member Posts: 222Hi gaby,
How much memory in that 2500 router?, if you have 16/16 send me a private, maybe i can help you.
Cant remember right now. Ill check tonight and let you know."If you spend too much time thinking about a thing,
you'll never get it done" -
OptionsBl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□I can use any other routing protocol. Like I mentioned OSPF works fine. I just want to use EIGRP for practice purposes.
Ok. I thought this was for something else. Well see if you can you IGRP but I highly doubt it will work? -
Optionsnetworker050184 Mod Posts: 11,962 ModI think you will be limited to IGRP only with that IOS.An expert is a man who has made all the mistakes which can be made.
-
OptionsBl8ckr0uter Inactive Imported Users Posts: 5,031 ■■■■■■■■□□networker050184 wrote: »I think you will be limited to IGRP only with that IOS.
Can you redistribute into igrp from eigrp?
Also this leads me to believe that it should support eigrp on 11.X
Field Alert: EIGRP and ARP Issues in Cisco IOS Software Releases 11.1 and 11.2 - Cisco Systems -
Optionsmikej412 Member Posts: 10,086 ■■■■■■■■■■System image file is "flash:igs-dr-l.111-17", booted via flash:mike: Cisco Certifications -- Collect the Entire Set!
-
Optionsgaby_978 Member Posts: 222It's an OLD OLD OLD IP/IPX/AT/IBM support IOS that required 8Meg DRAM and 4 MEG FLASH. Sorry -- no room for EIGRP in that feature set.
Damm. LOL ok ill try to get a newer IOS and try it again."If you spend too much time thinking about a thing,
you'll never get it done"