Zone-based Firewall - SDM or CLI?

I'm seeing the CBT Nuggets video about Firewall, and the author says that the CCNA Security exam is focused on SDM configuration and monitoring. Hence, do you advise me to study or don't ZBF configuration by CLI??

thanks

Find more posts tagged with

Comments

mikem2te

roghan wrote: »

I'm seeing the CBT Nuggets video about Firewall, and the author says that the CCNA Security exam is focused on SDM configuration and monitoring. Hence, do you advise me to study or don't ZBF configuration by CLI??

thanks

You need to understand what is going on behind the scenes IMO. SDM is not greatly used outside of the Cisco certs so atleast being able to read the CLI config is very important. Not in any great detail but understand a bit about the classmaps & policymaps.

mikej412

According to the CCNA:Security exam blueprint you should be prepared to "Implement Zone Based Firewall using SDM" for the exam. But don't forget that you do have an option in SDM to review/preview the CLI code that it generates -- so it probably helps to be able to recognize the CLI code/options.

roghan

mikej412 wrote: »

According to the CCNA:Security exam blueprint you should be prepared to "Implement Zone Based Firewall using SDM" for the exam. But don't forget that you do have an option in SDM to review/preview the CLI code that it generates -- so it probably helps to be able to recognize the CLI code/options.

Thanks!! Then I will study SDM configuration very well, but I will see also main CLI commands (class-map ... match-any/all, policy-map, zone, ...).

Bl8ckr0uter

roghan wrote: »

Thanks!! Then I will study SDM configuration very well, but I will see also main CLI commands (class-map ... match-any/all, policy-map, zone, ...).

know how to do it from the CLI AND the SDM.