Options

Cisco Aironet 1200 Series configuration help!!!

josunin75josunin75 Member Posts: 44 ■■□□□□□□□□
in CCNP
Hello, Mr. Cisco Gurus out there!

I need help configuring Cisco Aironet AP1230B access point!

Somehow all the websites I searches show the configuration through web, and
when I access the GUI web, it does not show up any configuration option!

Here is the show version output!
ap#show version
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.2(15)JA, RELEASE SOFTWARE (fc1)
Technical Support: Cisco - Shortcut
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 09-Apr-04 13:26 by kellmill
Image text-base: 0x00003000, data-base: 0x005E6160

ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.2(icon_cool.gifJA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)

ap uptime is 40 minutes
System returned to ROM by power-on
System image file is "flash:/c1200-k9w7-mx.122-15.JA"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
Export Compliance Product Report Application

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1230B-A-K9 (PowerPC405GP) processor (revision B0) with 14326K/2048K bytes of memory.
Processor board ID FOC08152NUQ
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0F:F7:37:A5:5F
Part Number : 73-8704-07
PCA Assembly Number : 800-23211-08
PCA Revision Number : A0
PCB Serial Number : FOC08152NUQ
Top Assembly Part Number : 800-23304-07
Top Assembly Serial Number : FTX0816R1TS
Top Revision Number : B0
Product/Model Number : AIR-AP1230B-A-K9

Configuration register is 0xF

ap#

So my question is that if I want to configure this access point through GUI,
do I need to maybe update my ios? or it's not supported on this AP?

Also where can I find information on configurting this AP through CLI?

-Thomas
=============================
on to BCMSN ^=============^

<Lab>
2 x 3550 EMI
2 x 2950
2 x 3640
1 x 2621
=============================
· Share on FacebookShare on Twitter

Comments

  • Options
    mikej412mikej412 Member Posts: 10,086 ■■■■■■■■■■
    If you need or want to upgrade your AP IOS, you should still be able to do it with a guest level Cisco CCO Account.

    You can find the configuration steps (GUI and/or CLI) in the Configuration Guide for your IOS version.

    Here's a link to a recent version: Cisco IOS Software Configuration Guide for Cisco Aironet Access Points, 12.4(3g)JA & 12.3( 8 )JEB - Chapter 4 - Configuring the Access Point for the First Time [Cisco Aironet 1200 Series] - Cisco Systems
    josunin75 wrote: »
    when I access the GUI web, it does not show up any configuration option!

    You don't see this?
    111869.jpg
    :mike: Cisco Certifications -- Collect the Entire Set!
    · Share on FacebookShare on Twitter
  • Options
    josunin75josunin75 Member Posts: 44 ■■□□□□□□□□
    I see the following screen when I access AP.

    BTW how do I upgrade IOS? on AP?
    unlike routers, there are many sub-directories and files!

    What do I do?

    Thanks.
    =============================
    on to BCMSN ^=============^

    <Lab>
    2 x 3550 EMI
    2 x 2950
    2 x 3640
    1 x 2621
    =============================
    · Share on FacebookShare on Twitter
  • Options
    tierstentiersten Member Posts: 4,505
    You're missing the files for the web GUI. They're packaged together with the upgrade files from CCO. The documentation will tell you how to extract the tar files.
    · Share on FacebookShare on Twitter
  • Options
    josunin75josunin75 Member Posts: 44 ■■□□□□□□□□
    Would you please give me more detail as far as how to upload html files?

    when I do "dir" under c1200-k9w7-mx.122-11.JA3 directory and html folder ,
    I see all the files. and how come it's not showing?

    basically I did "dir" and the output was
    ap#dir
    Directory of flash:/

    2 -rwx 688 Mar 01 1993 00:03:02 env_vars
    153 drwx 256 Mar 01 1993 00:00:45 c1200-k9w7-mx.122-11.JA3
    3 -rwx 1318 Mar 01 1993 00:53:12 config.txt
    4 -rwx 3068020 Mar 01 1993 00:18:54 c1200-k9w7-mx.122-15.JA
    5 -rwx 5 Mar 01 1993 00:53:12 private-config

    7741440 bytes total (3886592 bytes free)

    Well, since I do not have the cisco account, I cannot log in to download the ios!

    I just need instruction to update the ios and html files please (without logging into
    Cisco account!)

    I should be able to find files online. I just need instruction please!

    This AP's ios and html files upgrade is not like the old routers I used to upgrade.
    This is not one file anymore. These IOS is in tar files. icon_sad.gif

    Please Mr. Cisco gurus, Direct me to website! I need instruction on how to upgrade
    the ios and html files so I can configure this AP please. Also is there any way to configure them in CLI instead through GUI in case, I don't get to upgrade them.

    Thank you in advance.
    =============================
    on to BCMSN ^=============^

    <Lab>
    2 x 3550 EMI
    2 x 2950
    2 x 3640
    1 x 2621
    =============================
    · Share on FacebookShare on Twitter
  • Options
    tierstentiersten Member Posts: 4,505
    josunin75 wrote: »
    when I do "dir" under c1200-k9w7-mx.122-11.JA3 directory and html folder ,
    I see all the files. and how come it's not showing?

    basically I did "dir" and the output was
    ap#dir
    Directory of flash:/

    2 -rwx 688 Mar 01 1993 00:03:02 env_vars
    153 drwx 256 Mar 01 1993 00:00:45 c1200-k9w7-mx.122-11.JA3
    3 -rwx 1318 Mar 01 1993 00:53:12 config.txt
    4 -rwx 3068020 Mar 01 1993 00:18:54 c1200-k9w7-mx.122-15.JA
    5 -rwx 5 Mar 01 1993 00:53:12 private-config
    You've got two different versions on there. 12.2.11JA3 has the HTML files but 12.2.15JA only has the IOS binary file. Your AP is using 12.2.15JA.
    josunin75 wrote: »
    Well, since I do not have the cisco account, I cannot log in to download the ios!
    Create a guest account. You don't need a SMARTnet contract for AP IOS files.
    josunin75 wrote: »
    Please Mr. Cisco gurus, Direct me to website! I need instruction on how to upgrade the ios and html files so I can configure this AP please.
    mikej412 linked to the documentation. It is under the Managing Firmware and Configurations section.
    · Share on FacebookShare on Twitter
  • Options
    tim100tim100 Member Posts: 162
    josunin75 wrote: »
    This AP's ios and html files upgrade is not like the old routers I used to upgrade.
    This is not one file anymore. These IOS is in tar files. icon_sad.gif

    The command to upgrade is:

    archive download-sw
    · Share on FacebookShare on Twitter
  • Options
    josunin75josunin75 Member Posts: 44 ■■□□□□□□□□
    Thanks all!

    I finally got the GUI interface on my 1230B AP!

    I just need to configure it to use it.

    Thank you again!
    =============================
    on to BCMSN ^=============^

    <Lab>
    2 x 3550 EMI
    2 x 2950
    2 x 3640
    1 x 2621
    =============================
    · Share on FacebookShare on Twitter
Sign In or Register to comment.