1751 Router

Hi,

I just want to confirm that the 1751 does not support WIC-1T? Looking at the cisco site it mentions other wic cards but not the wic-1t.
Is this right enough?

Thanks

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

mikej412

control wrote: »

I just want to confirm that the 1751 does not support WIC-1T?

Nope -- I can NOT confirm that. And neither can Table 5 in the Cisco 1751 Modular Access Router Datasheet -- the WIC-1T is the first card listed in Table 5 WAN Interface Cards for the Cisco 1751 Router

PhildoBaggins

I appears it will work for the 1751 series.

Cisco 1751 Modular Access Router [Cisco 1700 Series Modular Access Routers] - Cisco Systems

Table 5 WAN Interface Cards for the Cisco 1751 Router

Module Description
WIC-1T
One serial, async, and sync (T1/E1)

WIC-2T
Two serial, async, and sync (T1/E1)

WIC-2A/S
Two low-speed serial (up to 128 kbps), async, and sync

WIC-1B-S/T
One ISDN BRI S/T

WIC-1B-U
One ISDN BUI U with integrated NT1

WIC-1DSU-56K4
One integrated 56/64-kbps, four-wire DSU/CSU

WIC-1DSU-T1
One integrated T1/fractional T1 DSU/CSU

WIC-1ADSL
One-port ADSL interface

WIC-1ENET
One-port 10BaseT Ethernet Interface

WIC-1SHDSL
One-port G.SHDSL interface

WIC-1AM
One-port V.90 analog modem WIC

WIC-2AM
Two-portV.90 analog modem WIC

WIC-1ADSL-I-DG
1-port ADSLoISDN Wan Interface Card

WIC-1ADSL-DG
1-port ADSLoPOTS WIC with Dying Gasp

WIC-1B-U-V2
1-Port ISDN BRI NT-1 WIC for 1700, 2600, 3600 and 3700 series

control

Ok, Thanks

Reason I was asking was after looking here: I read that only the following WIC are supported:

Supports the following WICs: ISDN BRI (U and S/T), 56- or 64-kbps DSU/CSU, FT1/T1 DSU/CSU, WIC-1ADSL, WIC-1ENET (Ethernet), highspeed serial, dual-serial, and 2Async/Sync.

Cisco 1751 Router Hardware Installation Guide - Cisco 1751 Router Overview [Cisco 1700 Series Modular Access Routers] - Cisco Systems

I must be misunderstanding the above.

mikej412

control wrote: »

highspeed serial, dual-serial, and 2Async/Sync

I'd guess those are the "plain English" designations for the WIC-1T, WIC-2T, and WIC-2A/S cards

You can also check out the NM/WIC/VWIC Compatibility PDF on the Cisco Partner Central Portable Product Sheets web page.

control

mikej412 wrote: »

I'd guess those are the "plain English" designations for the WIC-1T, WIC-2T, and WIC-2A/S cards

You can also check out the NM/WIC/VWIC Compatibility PDF on the Cisco Partner Central Portable Product Sheets web page.

Ahh now I feel silly. Thanks and I guess we all got to start somewhere on our Cisco Path.