iccnalab Gambit Communications

Has anyone tried this, I have an iPad, and was looking for another way to study. I also have a home lab that I have been trying to connect to, but I am to much of a newb to get it working.

Thanks

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

wbosher

What specifically are you trying to do?

PhildoBaggins

nerdydad wrote: »

Has anyone tried this, I have an iPad, and was looking for another way to study. I also have a home lab that I have been trying to connect to, but I am to much of a newb to get it working.

Thanks

You have a regular desktop/laptop with a USB-Serial adapter right?

In the early days of my cisco study screwing around with old 2500's and a 3810 was probably the best thing I could have done.

Hook it up. Post on the board if you get stuck.

Get the routers to talk...it will blow you mind lol

nerdydad

Guess I don't really know what I want to do yet, we have just started using packet tracer, but I need my laptop to run it, I would like to find a way to do labs from my iPad, as it is much more mobile.

I have the console hooked up to a pc that I can vnc into, I also downloaded an app that will let me telnet into the routers from the iPad, but I haven't configured the routers for remote access.

I am still very new with this, I just saw the iCCNAlab app on one of my breaks and wondered if anyone had tried it, and if it would replace Packet Tracer at all.

tha_dub

Give this a try...

For telnet access enter the following from the CLI

Enable
enable secret dave
username dave password dave
line vty 0 4
login local
exit
interface fast 0/0
ip address 192.168.1.2 255.255.255.0
no shut

This makes all your user names and passwords dave and assumes your fast Ethernet 0/0 port is connected to the network 192.168.1.0 /24 (generic soho router) and the .2 address is not yet taken.

Hope that helps.

PhildoBaggins

tha_dub wrote: »

Give this a try...

For telnet access enter the following from the CLI

Enable
enable secret dave
username dave password dave
line vty 0 4
login local
exit
interface fast 0/0
ip address 192.168.1.2 255.255.255.0
no shut

This makes all your user names and passwords dave and assumes your fast Ethernet 0/0 port is connected to the network 192.168.1.0 /24 (generic soho router) and the .2 address is not yet taken.

Hope that helps.

dont forget the almighty
!
logging synchronous
exec-timeout 60 0
!

tha_dub

PhildoBaggins wrote: »

dont forget the almighty
!
logging synchronous
exec-timeout 60 0
!

Good call!

peanutnoggin

PhildoBaggins wrote: »

dont forget the almighty
!
logging synchronous
exec-timeout 60 0
!

Keep in mind that the logging synchronous will only work on telnet if you enable "terminal monitor" from privileged mode. Other than that, the terminal messages will not show. HTH.

-Peanut

newguru

it is worth trying. iPad app is free and you can connect and try it out whether it works for you or not.