BGP wrote: » Hi Guys, I am using a terminal server Cisco 2511 to access my 3 2500 series router and everything is working fine I can jump from the access server to any router but when I want to jump back from the router to the access server I have to type control **** 6 x many time to make it work and I can get back but this is horrible L even when I make key map in my securecrt it is working good and I can get back but I have to press the key map around ten times . I believe there is problem ether in my configuration or in my hardware I well post my configuration Please help me I get disability in my fingers L My configuration : Building configuration... Current configuration : 656 bytes ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname ACCESS_Server ! ! ! ! ! ! ip subnet-zero no ip domain-lookup ip host R3 2003 100.1.1.1 ip host R1 2001 100.1.1.1 ip host R2 2002 100.1.1.1 ! ! ! ! interface Loopback0 ip address 100.1.1.1 255.255.255.255 no ip directed-broadcast ! interface Ethernet0 no ip address no ip directed-broadcast shutdown ! interface Serial0 no ip address no ip directed-broadcast no ip mroute-cache shutdown no fair-queue ! interface Serial1 no ip address no ip directed-broadcast shutdown ! ip classless no ip http server ! ! line con 0 exec-timeout 0 0 logging synchronous transport input none line 1 8 no exec transport input all line aux 0 line vty 0 4 login ! end
MrBrian wrote: » Hmm, so what you're saying is that you can jump from the access server to the other devices successfully using ctrl-shift-x, but you have to press it several times (you say around 10 in some cases) for it to work?? This seems odd to me.. I see you've got your IP host statements and they're pointing to your loopback IP address, which is good. I don't believe you have a configuration issue, or else it most likely wouldn't work at all. You say you're using secureCRT, and that's a solid emulation program.. I don't know, maybe try changing your setup around and using a different ios or emulation program to get to the bottom of it. I just use putty with my devices..I hit ctrl-shift-6 once to go back to my access server each time and it's fluid. Keep me posted if you find a solution for it..
advanex1 wrote: » What's the size of your memory?
MrBrian wrote: » but you have to press it several times (you say around 10 in some cases)
BGP wrote: » Hi all I found the solution and it is embarrassing but I have to say it I wasn’t hitting control shift 6 x correctly I press them in same time which is rung I have to press control shift 6 then hit x Any way I am so sorry to waste your time guys and I really appreciate your support
