Help understanding Frame Relay PVC STATUS.

It says on Odom's book that there are 4 PVC STATUS. Namely, active, inactive, static, and deleted.

I don't get clear understanding on the differences of the PVC STATUS. Like inactive and deleted.

What are the differences of the STATUS's?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

fsanyee

STATIC—LMI is disabled on the interface.
ACTIVE— The PVC is operational and can transmit packets.
INACTIVE—The PVC is configured, but down.
DELETED—The PVC is not present (DTE device only), which means that no status is received from the LMI protocol.

vazurahan

fsanyee wrote: »

STATIC—LMI is disabled on the interface.
ACTIVE— The PVC is operational and can transmit packets.
INACTIVE—The PVC is configured, but down.
DELETED—The PVC is not present (DTE device only), which means that no status is received from the LMI protocol.

Thanks, but what do you mean by DELETED—The PVC is not present (DTE device only)

mj8mj4

Thanks guys

fsanyee just wanted to add this

INACTIVE = PVC is configured correctly on the local switch, but there is a problem on the remote end of the PVC.
ACTIVE = The PVC is operational and can transmit packets.
DELETED = When the ISP deletes the PVC you'll see that the PVC status will reflect as DELETED.:)

mikeybinec

LMI is a status report between your local router and the ISP Frame Relay. Also called a keep alive. If you have a DELETED, the prob is on your end. Inactive means the problem is on the other end.. And obviously, ACTIVE is cool

If you see a DELETED, the common issue is the DLCI is configured wrong.. i.e. you configure it as a 123 but your isp is set at 321.