Pause Break key and alternate ways do not work on packet tracer 5.3.3!

Hey guyz, yesterday i was examining a topology and needed to change the current password. However, due to the fact that laptop i owned doesn't have the break key but pause break and it doesn't work either, i couldn't be able to do the thing i
wanted.

i attempted to drop to the rommon mode by break method also tried alternate ways but it always sent me to the user mode after boot.

I tried ctrl + pause break, nothing worked.

I also watched the youtube videos for solution but never worked.

Any ideas?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

alliasneo

thedrama wrote: »

Hey guyz, yesterday i was examining a topology and needed to change the current password. However, due to the fact that laptop i owned doesn't have the break key but pause break and it doesn't work either, i couldn't be able to do the thing i
wanted.

i attempted to drop to the rommon mode by break method also tried alternate ways but it always sent me to the user mode after boot.

I tried ctrl + pause break, nothing worked.

I also watched the youtube videos for solution but never worked.

Any ideas?

Hi thedrama, no I think your right you can't do it in PT. I've tried this before and it didn't work.

Ltat42a

This works for me in PT 5.3.3

Password recovery in Packet Tracer
Turn router off
Turn router back on
During the image load, pres & hold Ctrl+Shift+Fn/F6+C to interrupt the boot sequence
at the ROMMON > confreg 0x2142
Follow steps to recover password

On my laptop, I need the "Fn" key to press F6, push all keys down together
You can also type reload instead of turning the router off, then back on.

hth

thedrama

Ltat42a wrote: »

This works for me in PT 5.3.3

Password recovery in Packet Tracer
Turn router off
Turn router back on
During the image load, pres & hold Ctrl+Shift+Fn/F6+C to interrupt the boot sequence
at the ROMMON > confreg 0x2142
Follow steps to recover password

On my laptop, I need the "Fn" key to press F6, push all keys down together
You can also type reload instead of turning the router off, then back on.

hth

Thanks for the combo. I'll try that in a second.

Edit : it worked on router but not on l2 switch. However, i met another problem. It dropped into rommon 1, but once i typed 0x2142, it showed me rommon 2 then rommon 3 . Whats happening?

it took forever; rommon 2,3,4 and so on. Then i typed "boot". After that, router booted again and IOS was loaded. Once loading finished, set up mode came up.

BUT

Doesn't work on l2 switches.