Virtual Machines used for testing connectivity in CCNA Labbing??

This may sound like a stupid question but I want to know if it's possible for virtual machines to be setup on different networks of a CCNA test lab so as to test connectivity between networks (i.e. pinging). If it is possible then how can I achieve this?

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

Roguetadhg

I use GNS3 to do the virtual machines - and it does it remarkably well.
1. You'll need to install virtual box seperately and setup a computer using virtual box.
2. Go into GNS3 and setup virtual box: Edit > Preference > VirtualBox. Goto "VirtualBox Guest" tab > In the Identifer Name drop down box - select the computer you setup within VirtualBox.

You cant have the same computer multiple times. You can setup many computers within Virtualbox itself, and have it run inside GNS3.

It's pretty freaking awesome to be able to watch pings, transfer files

Oscedumir

Wow VERY cool didn't know you could do that in GNS3! I've fiddled around with it just a little. I'm sorry I didn't specify but in my case I have an actual physical home lab and I want to know if it can be done using virtual machines on say for instance a server running virtualbox or vmware. Would I need multiple NIC's on that server or how would that work?

fsanyee

you need multiple nic's or nic with multiple interfaces.

Patel128

Can virtual box assign certain vm to certain nics or better yet certain ports on a nic?

Roguetadhg

For the physical computers - yeah, you'd need more than one network card. I'm pretty sure of that, I haven't done that so don't quote me.

Anyways, they're only 10 bucks for a single port on newegg.

Oscedumir

fsanyee wrote: »

you need multiple nic's or nic with multiple interfaces.

Thanks for the replies, now to find some reasonably priced 2 or 4 port NICs that will work on win 7 x64

Roguetadhg

If you have the space, just get 4 seperate cards, instead of investing in a space-saving $192 nic. $40 Vs $200

Newegg.com - Computer Hardware, Networking, Wired Networking, Network Interface Cards, 4 x RJ45

Oscedumir

Roguetadhg wrote: »

If you have the space, just get 4 seperate cards, instead of investing in a space-saving $192 nic. $40 Vs $200

Newegg.com - Computer Hardware, Networking, Wired Networking, Network Interface Cards, 4 x RJ45

Holy smokes even the 2 port NIC's are pricey!! I think i'll stick three of those single port NIC's in one box and another 3 in a different box that should be enough for now.

joshmadakor

I have two built in NICs and then I bought two of these from Newegg: Newegg.com - TRENDnet TEG-PCITXR Gigabit Network Adapter 10/ 100/ 1000Mbps PCI 1 x RJ45

I have 4 physical NICs total. I have 3 separate VMs each using a physical NIC and it works very nicely.

martell1000

you could get a card (or two) that supports vlan tagging (801.q) and put the virtual machines in different vlans and provide a trunk link.

VMware Communities: Windows 7/vista and VLAN Tagging...

CodeBlox

THIS_IS_AMAZING! I never knew I could do this. Had to update GNS3 to get the Vbox option to show up. And I've got plenty of VMs to make this work well with.

fsanyee

you dont have to update. in older versions of gns3, you can connet the routers to the virtualbox host with a cloud.

ciscoman2012

I use this adapter from TRENDnet that goes from USB to RJ45. I have two of them and it's great being able to use one as a TFTP server. The $17 price is even better for each adapter. I'm thinking about getting 2 more.

Amazon.com: TRENDnet USB to 10/100Mbps Adapter TU2-ET100: Electronics

JeanM

Don't forget to look on ebay as well if you want to go the physical route - 4port nic | eBay

Oscedumir

JeanM wrote: »

Don't forget to look on ebay as well if you want to go the physical route - 4port nic | eBay

Those are really inexpensive quad port nics. I just have to make sure they're supported by Win 7 x64.

Thanks!

Zartanasaurus

If you just want to test basic connectivity through pings, why not attach a couple of extra routers in GNS3 and turn off IP routing to act as hosts?

Oscedumir

Zartanasaurus wrote: »

If you just want to test basic connectivity through pings, why not attach a couple of extra routers in GNS3 and turn off IP routing to act as hosts?

My lab is an actual physical home lab and I don't have that many physical hosts to test connectivity between the networks that have been setup. That's why I was thinking more along the line of using virtual machines in a box in conjunction with multi-port NICs to act as the hosts and test connectivity that way.

R-Legend

I am using a few of the Cisco 1230 Access points for host, they are excellent. It can also be used for HTTP, Telnet, HTTPS ect... Also if you have an access sever it make everything better. Got them on E-bay for $10 each.

alan2308

R-Legend wrote: »

I am using a few of the Cisco 1230 Access points for host, they are excellent. It can also be used for HTTP, Telnet, HTTPS ect... Also if you have an access sever it make everything better. Got them on E-bay for $10 each.

Great idea there. You can also find 1600 and 2500 series routers for about the same price.