ICND1 Need a lab?

Hey guys,

I just started studying on the ICND1 Exam, hopefully going to be able to put in about 4-5 hours per week on studying and plan on taking the exam towards the end of november / beginning December.

Going through forum posts, it sounds like ICND1 is all theory so I just want to ask straight out "Do I need to do any labbing for ICND1?"

After for ICND2 I know its lab all day everyday, but for ICND1 I was wondering if I need to go ahead and lab.

Thanks,

Find more posts tagged with

Save $250 on 2025 certification boot camps from Infosec!

Book now with code EOY2025

Button

Comments

NotHackingYou

Remember, the goal here really isn't to pass the test. The goal is to master the content and blow the test out of the water. With that being said, I used a lab for ICND1 and it helped a lot. You could use Packet Tracer and be OK.

Patel128

A lab is not required, but I would say that it does help. I really like having a lab. If your just taking ICND1 to see if you like networking or if Cisco is for you then maybe you may wanna hold off. If you do want to go further in the Cisco realm then definitely get a lab.

xkaijinx

No no I fully intend on networking as a career, I was just trying to blow through the first test and than move into real labbing on the second.

However, I see what you guys mean and it makes sense.

What labs do you recommend creating for starting out with ICND1 ? I can download Packet Tracer and use that for it than.

Illumanati

xkaijinx wrote: »

No no I fully intend on networking as a career, I was just trying to blow through the first test and than move into real labbing on the second.

However, I see what you guys mean and it makes sense.

What labs do you recommend creating for starting out with ICND1 ? I can download Packet Tracer and use that for it than.

To answer your question, you don't need lab equipment but you will need to run and practice plenty of commands to configure a switch and router using Command Line Interface commands for ICND1. You will need to set up a packet tracer network or any other resource based network or you can use online resources like Testout.com. I've been doing this and there is a lot of command line practice, not necessarily labbing, that you have to do to pass. You cannot attempt them unless you use this or have a packet tracer lab already done so you can practice. ICND2, forget about it, you must do Packet Tracer labs just to understand the topics. I still have to read the tutorial for PT but I will do it this week.

NetworkVeteran

xkaijinx wrote: »

What labs do you recommend creating for starting out with ICND1 ? I can download Packet Tracer and use that for it than.

Boson Netsim costs a pretty penny, but comes with suggested and graded labs for ICND1 and ICND2. Your book should provide ideas (any topologies they discuss). Googling "CCENT Lab Guide" gets tons of hits, like TechExams, INE, and Cisco Learning Network.

A popular CCNA guide--

http://www.freeccnaworkbook.com/labs/

lantech

Even for ICND1 you do need to lab. Whether that's on real equipment or something like Packet Tracer or GNS3. I doubt you would get through the test without doing labs unless you already have experience.

Roguetadhg

Lab building guide:
http://www.techexams.net/forums/ccna-ccent/81293-how-study-ccent-ccna-tutorial.html

Labs, Simulators, Emulators.. all discussed. Leave feedback for addems!