I have 2 active default gateways, what does that mean?

So, i went into my command prompt just to study and get a feel for it and i noticed both my wireless lan adapter and my ethernet adapter are active with the same default gateway. I checked around and heard that you shouldn't have more than one active. What should i do?

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

SecurityThroughObscurity

cmd.exe -> route print

look at the default route and the metric.

StonedHitman

SecurityThroughObscurity wrote: »

cmd.exe -> route print

look at the default route and the metric.

Sorry, but could you please explain what it is im looking for?

netsysllc

In your case it will have no effect you still only have one defined as it is the same. If they were different then you could have issues.

StonedHitman

Ah that makes sense thx, one more thing...since they are the same how do i know which one im using?

DevilWAH

route-print will tell you the gate way that is used.

and under the network adapter settings page, where is shows the adapter you have, hit Alt key and from the menu chose Advanced --> advanced settings..

here you will see the order your network cards are prioritized. you can also swap the order over.

by default the PC will use either the card that is directly connected to a sub-net, then if it needs a DFGW it will use the one on the card highest in this list.

I always put my wired cards first and wired second, but if they are both on the same network it should not matter, will just mean you use the wireless connection in preference to the wired which could be slower/less bandwidth.