Cisco 2651xm not powering up

Abdul201288

I wanted to study on my CCNA lab, Obviously, I don't leave my equipment on (Also I haven't touched my lab for 2 weeks). Anyway, as I turned on the plug all the equipment turned on, except the 2651xm, So I tried all the plugs around the house nothing happened. Now All my Commands and my progress all gone.

What I Have, 2950 24 ports, 3524XL 24 port with 2 GBICs connectors, 2651xm and the 1760.

Is there a of fixing the router? or is it Dead? I also don't have the money for a router at the moment.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

[Deleted User]

Are any of the lights showing up on your Cisco router on any of the interfaces? Are you hearing any of the fans circulating? I don't believe you corrupted your IOS image but who knows. Reference their documentation for more information if necessary: Cisco 2621XM and Cisco 2651XM Modular Access Routers FIPS 140-2 Non-Proprietary Security Policy - Cisco

Abdul201288

kMastaFlash wrote: »

Are any of the lights showing up on your Cisco router on any of the interfaces? Are you hearing any of the fans circulating? I don't believe you corrupted your IOS image but who knows. Reference their documentation for more information if necessary: Cisco 2621XM and Cisco 2651XM Modular Access Routers FIPS 140-2 Non-Proprietary Security Policy - Cisco

No lights showing nor the fan starting.

tycar86

Make sure the power switch on the router is flipped on. If so, sounds like a blown fuse, bad contact on the switch, or blown power supply.

Abdul201288

tycar86 wrote: »

Make sure the power switch on the router is flipped on. If so, sounds like a blown fuse, bad contact on the switch, or blown power supply.

All my progress for my CCNA lab is all gone.

tycar86

Here's a power supply - Astec Power Supply Model AA21430 for Cisco 2611XM 2651XM Router 34 1609 02 50W | eBay

Grab a multimeter and check voltages. If the power supply is dead its a relatively easy fix.