Cisco Unity

So I have a CUCM on VM going on but failed to install "Cisco Unity" at the time due to hardware issue.

Is "Cisco Unity" crucial for the exam? If I want it, can I only install "Cisco Unity" or do I have to install the whole thing again?

If so, what should be the hardware settings to make this work?

Thanks.

Find more posts tagged with

Comments

shodown

Not sure whats on the test

Start here Installation guide.

Installation Guide for Cisco Unity Connection Release 9.x - Installing the Operating System and Cisco Unity Connection 9.x [Cisco Unity Connection] - Cisco

Then integration guide

Cisco Unified Communications Manager SIP Integration Guide for Cisco Unity Connection Release 9.x - Setting Up a Cisco Unified Communications Manager 8.x and 9.x SIP Trunk Integration with Cisco Unity Connection [Cisco Unity Connection] - Cisco

Then

Cisco Systems, Inc

Learn how to use this site. Read the SRND's. They will tell you the majority of what you need to know. I know this is the long route to getting your CCNA V, but you will be much better off in the end. It took me 4 years to get my CCNP Voice, but doing it this way I feel comfortable dealing with the majority of voice engineers out here.

sendalot

Thanks for those links. What is Unity connection mainly for? For SIP or H323 trunking?

Thanks.

shodown

Time to do some googling and reading.

ande0255

Unity Connection is Communications Manager's voice messaging counter part, but that's all in the training videos. INE has some really good free CCNA Voice videos I used to pass, but I also work as a Voice tech for UC, so my job helped solidify everything.

sendalot

Will do, thanks ya'll

JeanM

shodown wrote: »

Time to do some googling and reading.

sendalot - are you following / reading any kind of voice book for this at all ?

sendalot

OCG for CCNA Voice and Portable Command Guide.