Issue trying to get GNS3 IOU working on windows and upload window won't display.

Okay so I've been following the instructions with GNS3's website on how to setup the IOU. I have the .ova vm and ran it and have the network adapter set as the virtual box loopback adapter. It says to go to http://192.168.56.101:8000/upload and I make sure to turn off my main adapter before going to prevent address/adapter conflict, but it still doesn't come up. I just need to upload the IOS and I should be good to go. Anyone had this problem before?

Find more posts tagged with

Comments

zerglings

Use SCP and put it in the right directory.

OfWolfAndMan

It's not the Upload I'm having a problem with. I can't even access the Upload page itself. I can ping the virtualbox loopback adapter, but I just can't access it in the browser.

Dieg0M

Yes, had to reinstall Virtualbox because drivers werent installed correctly. For help on GNS Alpha a better place to ask would be GNS3 forums.

martell1000

did you try to log into the vm? i remember a post on the gns3 forums that you should try that in case the upload link doesnt work.

you can also try to put the file manually on the /home/gns3/Documents/GNS3/ folder without using the upload script.

zerglings

zerglings wrote: »

Use SCP and put it in the right directory.

Forget accessing it via web browser. Never really had success with it. Both Linux and Windows install. Just use the SCP and put it in the right directory and be done with it. It's really unimportant if you access via web browser or manually putting the file(s) in the proper directory.

OfWolfAndMan

Well I've tried posting the print screen several times now, so I'll state the situation:

I have everything set on GNS3. iourc, remote server, startup-config text file, and IOU files. However, I get the following error when trying to add into the blank layout: :Could not connect to 192.168.56.103 on port 8000: (WinError 10061) No connection could be made because the target machine actively refused it."

martell1000

socket error 10061 is python error code for connection refused

might be caused by firewall or antivirus

OfWolfAndMan

I first tried by enabling port 8000 on the firewall, then I completely disabled firewall and antivirus temporarily. To no avail

still receive the same error. Is there some compatibility option I needed to enable I don't know about?

martell1000

can you ping VM-IP:8000?
are you using virtual box or vm ware? did you get the appropiate .ova?

OfWolfAndMan

OK so I found the ova that works for Virtualbox (As the other one I had was apparently for VMWare). I was able to get to the upload screen and upload the IOS and now I'm in GNS3 and all paths have been set. I was able to drag the IOU out to the center, but when I try starting it, I get the error: "Server error [-3200]: IOU1: IOU 'IOU directory' is not accessible."
Firewall maybe? I'll look into it.

martell1000

did you configure the iourc file?

OfWolfAndMan

Yes. The text file said gns3-iouvm = xxxxxxxx (It doesn't actually say all those x's lol)
Named it iourc.txt. Anything I'm missing in the text file?

fredrikjj

It's an alpha release of a software that isn't even publically released. They WANT feedback and you should go to their forum, not this one.

martell1000

OfWolfAndMan wrote: »

Yes. The text file said gns3-iouvm = xxxxxxxx (It doesn't actually say all those x's lol)
Named it iourc.txt. Anything I'm missing in the text file?

file just needs to be named iourc without any extensiona, and you need to remove the Xs with the IOU licensekey

OfWolfAndMan

I didn't name it with any extension. Also, the x's are just substituted for my actual license key. Should I redo the iourc file then?

OfWolfAndMan

fredrikjj wrote: »

It's an alpha release of a software that isn't even publically released. They WANT feedback and you should go to their forum, not this one.

Alright. I'll hit them up. Thanks!

martell1000

if the file is named iourc (without .txt) and your license key is correct for hostname gns3-iouvm and hostid 00000000 the file is good.

if the error continues and everything ist set up corretly get in contact with the devs on the gns3 forums and give them a report of the error

OfWolfAndMan

I just started a thread. We'll see what the admins have to say:

GNS3 • View topic - Error received after trying to start IOU

Lorgorsor

Hi,

Please if you have the time, can you show me how to "Use SCP and putting it in the directory", because, I am having trouble accessing the web at 19.168.56.101:8000/upload. Thanks

Lorgorsor

Jon_Cisco

I'm hoping to set mine up someday so I'll be referring back here when I run into trouble. Looks like you got it running let us know how it's working out.

Lorgorsor

Hi
Please, what server would you recommend for use on my PC, if I am going to use SCP, in configuring the gns3 beta also can't I use any other SSH software?
Thanks