Help needed on ASA issue!

Please help as I am trying to connect my ASA to my Microsoft loopback adapter which is already bridged between with my wireless nic.I made sure I rebooted after I created the loopback adapter and also rebooted when I bridged both the wireless and loopback adapters.

Inside the ASA I configured the outside interface:
(asaconfig)#int gigabitethernet 1
(asaconfig)#nameif outside
(asaconfig)#security-level 0
(asaconfig)#ip add dhcp

My ip address of my wireless router is 192.168.0.1 and my ip address of the computer/loopback adapter is 192.168.0.5. What can I do to pull an ip address from my dhcp server (wireless router) to my ASA? Once it's successful there should be pulled ip address under my interface gigabitethernet 1 via dhcp instead of saying unassigned.

Find more posts tagged with

Free for TechExams community: Cybersecurity salary guide

Compare cert salaries and plan your next career move

Button

Comments

ande0255

Could you paste the output from 'sh ver' ?

daniel.mark

Using Windows 8.1 and enabled compatibility mode for windows 7 on Winpcap with recent version. I disabled my firewall on computer and on wireless router. Disabled Antivirus. I even assigned a static ip under int gig 1(outside int) in the same subnet of 192.168.0.0/24 and still cant ping to my pc or wireless router.

daniel.mark

Cisco Adaptive Security Appliance Software Version 8.4(2)

Compiled on Wed 15-Jun-11 18:17 by builders
System image file is "Unknown, monitor mode tftp booted image"
Config file at boot was "startup-config"

ciscoasa up 11 secs

Hardware: ASA 5520, 1024 MB RAM, CPU Pentium II 1000 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash unknown @ 0x0, 0KB

0: Ext: GigabitEthernet0 : address is 00ab.cd92.5200, irq 0
1: Ext: GigabitEthernet1 : address is 00ab.cd92.5201, irq 0
2: Ext: GigabitEthernet2 : address is 00ab.cd92.5202, irq 0
3: Ext: GigabitEthernet3 : address is 0000.abbe.1103, irq 0
4: Ext: GigabitEthernet4 : address is 0000.abc7.e304, irq 0
5: Ext: GigabitEthernet5 : address is 0000.ab82.c905, irq 0

Licensed features for this platform:
Maximum Physical Interfaces : Unlimited perpetual
Maximum VLANs : 100 perpetual
Inside Hosts : Unlimited perpetual
Failover : Active/Active perpetual
VPN-DES : Enabled perpetual
VPN-3DES-AES : Enabled perpetual
Security Contexts : 2 perpetual
GTP/GPRS : Disabled perpetual
AnyConnect Premium Peers : 5000 perpetual
AnyConnect Essentials : Disabled perpetual
Other VPN Peers : 5000 perpetual
Total VPN Peers : 0 perpetual
Shared License : Disabled perpetual
AnyConnect for Mobile : Disabled perpetual
AnyConnect for Cisco VPN Phone : Disabled perpetual
Advanced Endpoint Assessment : Disabled perpetual
UC Phone Proxy Sessions : 2 perpetual
Total UC Proxy Sessions : 2 perpetual
Botnet Traffic Filter : Disabled perpetual
Intercompany Media Engine : Disabled perpetual

This platform has an ASA 5520 VPN Plus license.

Serial Number: 123456789AB
Running Permanent Activation Key: 0x4a3ec071 0x0d86fbf6 0x7cb1bc48 0x8b48b8b0 0xf317c0b5
Configuration register is 0x0
Configuration has not been modified since last system restart.

RouteMyPacket

Welcome to GNS3

ASA 8.4 with ASDM on GNS3 - Step by Step Guide - XeruNetworks

daniel.mark

Thats just a how to for connecting asdm to the asa. In this problem I need to have the asa pull and ip address via dhcp from my wireless router which is also connected to my loopback adapter(bridged to my wifi adapter).

daniel.mark

Can anyone help me solve this?

alan2308

daniel.mark wrote: »

Thats just a how to for connecting asdm to the asa.

Yes, but connectivity is connectivity whether its for ASDM or for DHCP.

daniel.mark

I followed the steps to the asa setup and dhcp setup. For some reason I cant get my interface g0/1 to pull a dhcp ip address from
My wireless router.

d4nz1g

Have you tried to sniff the traffic?