Options

Help With HomeLab Switch connections

2»

Comments

  • Options
    HondabuffHondabuff Member Posts: 667 ■■■□□□□□□□
    delete vlan.dat
    “The problem with quotes on the Internet is that you can’t always be sure of their authenticity.” ~Abraham Lincoln
    · Share on FacebookShare on Twitter
  • Options
    sagarmistrysagarmistry Member Posts: 108
    Hondabuff wrote: »
    delete vlan.dat


    No luck. it says no such file.


    S2#conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    S2(config)#delete
    S2(config)#delete ?
    % Unrecognized command
    S2(config)#delete ^Z ^
    % Invalid input detected at '^' marker.


    S2#delete
    01:41:18: %SYS-5-CONFIG_I: Configured from console by console
    S2#delete ?
    flash: File to be deleted


    S2#delete vlan50.dat
    Delete filename [vlan50.dat]? y
    Delete flash:y? [confirm]y
    %Error deleting flash:y (No such file or directory)
    S2#
    S2#delete vlan.dat
    Delete filename [vlan.dat]? y
    Delete flash:y? [confirm]y
    %Error deleting flash:y (No such file or directory)
    S2#
    S2#
    S2#
    S2#show vlan stat
    ^
    % Invalid input detected at '^' marker.


    S2#show vlan bri
    VLAN Name Status Ports
    ----
    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
    Fa0/5, Fa0/6, Fa0/7, Fa0/8,
    Fa0/9, Fa0/10, Fa0/11, Fa0/12
    50 Computers active
    1002 fddi-default active
    ICND1 ---> 6th March
    · Share on FacebookShare on Twitter
  • Options
    sagarmistrysagarmistry Member Posts: 108
    Hondabuff wrote: »
    delete vlan.dat


    My bad just saw my mistake:

    But still not deleting.

    S2#delete vlan.dat
    Delete filename [vlan.dat]?
    Delete flash:vlan.dat? [confirm]
    S2#
    S2#
    S2#show vlan bri
    VLAN Name Status Ports
    ----
    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
    Fa0/5, Fa0/6, Fa0/7, Fa0/8,
    Fa0/9, Fa0/10, Fa0/11, Fa0/12
    50 Computers active
    1002 fddi-default active
    1003 token-ring-default active
    1004 fddinet-default active
    1005 trnet-default active
    S2#delete vlan50.dat
    Delete filename [vlan50.dat]?
    Delete flash:vlan50.dat? [confirm]
    %Error deleting flash:vlan50.dat (No such file or directory)
    S2#
    S2#
    S2#
    S2#show vlan bri
    VLAN Name Status Ports
    ----
    1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4,
    Fa0/5, Fa0/6, Fa0/7, Fa0/8,
    Fa0/9, Fa0/10, Fa0/11, Fa0/12
    50 Computers active
    1002 fddi-default active
    ICND1 ---> 6th March
    · Share on FacebookShare on Twitter
  • Options
    sagarmistrysagarmistry Member Posts: 108
    Guyss, the delete vlan.dat command worked.

    All I had to do was give that command and then type reload from privileged mode.
    IT asked me to save configs and switch restarted and when i type show vlan brief only the default vlans show up and vlan 50 is gone!!

    Thank you guys!!
    ICND1 ---> 6th March
    · Share on FacebookShare on Twitter
Sign In or Register to comment.