VCP-NV Resources
tomtom1
Member Posts: 375
VMware NSX resources
In my preparation for the VMware Certified Professional – Network Virtualization (VCP - NV) exam I will come across resources that will help me in achieving exam succes. To give something back to this community, this thread will link to those resources.
Blueprint: https://mylearn.vmware.com/lcms/web/portals/certification/VCP_Blueprints/VCP-NV-Exam-Blueprint-v1_1.pdf
This topic will be updated as I progress in my studies.
In my preparation for the VMware Certified Professional – Network Virtualization (VCP - NV) exam I will come across resources that will help me in achieving exam succes. To give something back to this community, this thread will link to those resources.
Blueprint: https://mylearn.vmware.com/lcms/web/portals/certification/VCP_Blueprints/VCP-NV-Exam-Blueprint-v1_1.pdf
This topic will be updated as I progress in my studies.
Comments
-
Asif Dasl Member Posts: 2,116 ■■■■■■■■□□I was going to post that webinar, but I see it has already been posted... the original webpage for it is <here>, just in case there is any more content on that site that might interest others.
VMware Education - VMware Network Virtualization Fundamentals (Self-Paced 3 Hours)
http://featurewalkthrough.vmware.com/NSX/
www.vExperienced.co.uk » Thoughts on VMware’s NSX ICM course
Elastic Sky - NSX quiz questions
NSX Compendium - Network Inferno
Install NSX in a home Lab using VMware Workstation
There is NSX labs over at VMware HOL
VMware - Hands On Labs - Networking
As far as I can see you need switches with VXLANs and OVSDB (Open vSwitch Database)
HP - Greater agility and continuity - Brochure (Brochure/4AA5-4307ENW.pdf)
Some more switch info from Cumulus Networks - these are the cheapest switches that I could find that do both VXLANs & OVSDB
Cumulus Networks - Connecting Physical and Virtual Worlds with VMware NSX and Cumulus Linux
Cumulus Networks - Rethinking Networking, Cumulus Linux Architecture
Slideshare - SDN Hub - Understanding and deploying Network Virtualization
Pluralsight - Software Defined Networking (SDN): The Big Picture -
Essendon Member Posts: 4,546 ■■■■■■■■■■
-
tomtom1 Member Posts: 375I'm currently in the NSX ICM, and will share the resources once the course is complete. There are some jewels in there which will help you guys (and myself) preparing for the VCP-NV.
-
JustFred Member Posts: 678 ■■■□□□□□□□I guess this is for their paid training?
for a limited time whenever you attend one you’ll also receive a 50% off VCP exam voucher.[h=2]"After a time, you may find that having is not so pleasing a thing, after all, as wanting. It is not logical, but it is often true." Spock[/h] -
tomtom1 Member Posts: 375As far as I can see you need switches with VXLANs and OVSDB (Open vSwitch Database)
HP - Greater agility and continuity - Brochure (Brochure/4AA5-4307ENW.pdf)
Well, that's only if you want to extend your VXLANs further than the virtual environment. In a typical NSX deployment, it would look something like this:
Where basically you have the VXLANs (VNI's or logical switches, all the same) per tier or tenant on the bottom, and the DLR (distributed logical router) in the middle, providing distributed routing between each of the VXLANs. This is called south west traffic. The DLR is so awesome because they really separated the management, control, and data plane. Like this:
The management plane is located in the NSX manager.
The control plane is actually provided by 2 separate entities, the NSX controllers (do note that the only current supported number of NSX controllers is 3) and the router control VM, which is provisioned when you deploy a DLR.
The data plane is located in the ESXi host kernel, when doing the host provisioning steps, the following 3 VIBs are deployed on the ESXi host:esx-dvfilter-switch-security5.5.0-0.0.1546774 esx-vsip5.5.0-0.0.1546774 esx-vxlan5.5.0-0.0.1546774
So, when you kill the control plane (for example, all controllers and the logical router control VM fail) the forwarding can still take place. Only the learning of new routes won't be possible until the control plane is back up again.
"Above" the logical router is an NSX ESG (Edge Services Gateway) which is able to provide communication between the virtual LAN (VXLANs) and the physical LAN (VLAN). This is called north-south traffic. So, there is no need for specific switches if your implementation of NSX just spans the virtual environment, as the ESG is able to connect both worlds. The DLR is able to do this too, but it makes more sense to spawn up and ESG for this purpose. -
tomtom1 Member Posts: 375I'd also like to inform everyone currently (or for the future) pursuing VCP-NV that the NSX Design Guide is a resource that isn't widely spread, but is a jewel in terms of technical NSX content. You can ask QHalo
The NSX Design Guide 2.1 can be found here:
https://communities.vmware.com/servlet/JiveServlet/previewBody/27683-102-3-37383/NSXvSphereDesignGuidev2.1.pdf -
JustFred Member Posts: 678 ■■■□□□□□□□[h=2]"After a time, you may find that having is not so pleasing a thing, after all, as wanting. It is not logical, but it is often true." Spock[/h]
-
dave330i Member Posts: 2,091 ■■■■■■■■■■The NSX Design Guide 2.1 can be found here:
https://communities.vmware.com/servlet/JiveServlet/previewBody/27683-102-3-37383/NSXvSphereDesignGuidev2.1.pdf
Found a possible error in the guide regarding unicast mode. In the ICM course book, it mentions a segment VTEP proxy designated by NSX controller. In the 2.1 guide, it indicates local ESXi hosts elect their own segment VTEP proxy.
Also, congrats QHalo on passing.2018 Certification Goals: Maybe VMware Sales Cert
"Simplify, then add lightness" -Colin Chapman