CCNA Lab Routers
sh4d0w0lf
Registered Users Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
Hi Guys,
I've been building my CCNA Lab and have currently got the following
Routers:
Cisco 2821,
Cisco 3745,
Cisco 2620xm - Faulty ethernet port but otherwise everything else works.
Switches:
A bog standard 2950-24
2950G-48
and a 3550 emi.
I'm wanting a 4th router so I can use one as a frame relay switch, I've the option of purchasing a couple of 3725's for a really good price.
Would these be ok for my ccna studies and eventually the ccnp?
I have all the required nm's and wic cards for the lab i'm wanting to build, and I'd likely replace the faulty 2620xm with the spare 3725.
Thanks, In advance
I've been building my CCNA Lab and have currently got the following
Routers:
Cisco 2821,
Cisco 3745,
Cisco 2620xm - Faulty ethernet port but otherwise everything else works.
Switches:
A bog standard 2950-24
2950G-48
and a 3550 emi.
I'm wanting a 4th router so I can use one as a frame relay switch, I've the option of purchasing a couple of 3725's for a really good price.
Would these be ok for my ccna studies and eventually the ccnp?
I have all the required nm's and wic cards for the lab i'm wanting to build, and I'd likely replace the faulty 2620xm with the spare 3725.
Thanks, In advance
Comments
-
critanime
Member Posts: 6 ■□□□□□□□□□
Apart from the XM you should be good for further study. I have a 2811 and 2821 and I was told that even with a 1721 I should be good for further studies.