how would I know which switch model will be tested?

johnifanx98johnifanx98 Member Posts: 329
in CCNA & CCENT
Like 1900, 2950?
· Share on FacebookShare on Twitter

Comments

  • networker050184networker050184 Mod Posts: 11,962 Mod
    They don't test specific models per se, but the code the course ware is developed on is a good indicator of the outputs you should expect.
    An expert is a man who has made all the mistakes which can be made.
    · Share on FacebookShare on Twitter
  • clarsonclarson Member Posts: 903 ■■■■□□□□□□
    like networker said, you aren't getting tested on cisco hardware, but on how the ios works. So, if your hardware and it's ios supports the features you need to know, that is good enough for the exam. So, there are plenty of hardware/ios combinations that will do the job.

    that being said, the course work and exam were written using 2960 switches running version 15 of the ios.

    I'm currently using 2x 2950T (can't run version 15 of the ios) switches to study for the ccna. and, I have 7x 2960 switches here that i'm not using.
    · Share on FacebookShare on Twitter
Sign In or Register to comment.