problem in hangup calls in router 3945 (E1)

underzeeroo

hello friends, i made a trunk between asterisk and cisco router as gateway with E1,
inbound and outbound work well but i have problem in outgoing call from asterisk extensions to pstn by router .
when other party of call hangup the call , asterisk extensions stay busy about 30 seconds.
i wonder why router can't detect hangup with E1 (cause E1 can detect Hangup)

this is my router configurations:

controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31


interface Serial0/0/0:15
no ip address
encapsulation ppp
isdn switch-type primary-net5
isdn overlap-receiving T302 7000
isdn incoming-voice modem
isdn send-alerting
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
voice-port 0/0/0:15
echo-cancel coverage 64
no vad
playout-delay nominal 200
playout-delay minimum high
no comfort-noise
cptone DE
bearer-cap Speech
dial-peer voice 9 pots
translation-profile incoming Remove9
translation-profile outgoing Remove9
numbering-type unknown
destination-pattern .T
incoming called-number .
direct-inward-dial
port 0/0/0:15

how can i fix problem ?

negru_tudor

underzeeroo wrote: »

hello friends, i made a trunk between asterisk and cisco router as gateway with E1,
inbound and outbound work well but i have problem in outgoing call from asterisk extensions to pstn by router .
when other party of call hangup the call , asterisk extensions stay busy about 30 seconds.
i wonder why router can't detect hangup with E1 (cause E1 can detect Hangup)

this is my router configurations:

controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31


interface Serial0/0/0:15
no ip address
encapsulation ppp
isdn switch-type primary-net5
isdn overlap-receiving T302 7000
isdn incoming-voice modem
isdn send-alerting
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
voice-port 0/0/0:15
echo-cancel coverage 64
no vad
playout-delay nominal 200
playout-delay minimum high
no comfort-noise
cptone DE
bearer-cap Speech
dial-peer voice 9 pots
translation-profile incoming Remove9
translation-profile outgoing Remove9
numbering-type unknown
destination-pattern .T
incoming called-number .
direct-inward-dial
port 0/0/0:15

how can i fix problem ?

https://uctickets.wordpress.com/2014/03/21/8-ip-phone-doesnt-hangup-an-outbound-call-when-external-user-hangup-first/

Hope this helps

negru_tudor

underzeeroo wrote: »

hello friends, i made a trunk between asterisk and cisco router as gateway with E1,
inbound and outbound work well but i have problem in outgoing call from asterisk extensions to pstn by router .
when other party of call hangup the call , asterisk extensions stay busy about 30 seconds.
i wonder why router can't detect hangup with E1 (cause E1 can detect Hangup)

this is my router configurations:

controller E1 0/0/0
framing NO-CRC4
pri-group timeslots 1-31


interface Serial0/0/0:15
no ip address
encapsulation ppp
isdn switch-type primary-net5
isdn overlap-receiving T302 7000
isdn incoming-voice modem
isdn send-alerting
isdn bchan-number-order ascending
isdn sending-complete
no cdp enable
voice-port 0/0/0:15
echo-cancel coverage 64
no vad
playout-delay nominal 200
playout-delay minimum high
no comfort-noise
cptone DE
bearer-cap Speech
dial-peer voice 9 pots
translation-profile incoming Remove9
translation-profile outgoing Remove9
numbering-type unknown
destination-pattern .T
incoming called-number .
direct-inward-dial
port 0/0/0:15

how can i fix problem ?

so...did the "progress indicator" tweak fix the problem or didn't get to trying it out?