Study questions / simulation /guide for VCIX6-NV and (soon) VCAP6-DCV Deploy
The VCAP/VCIX v6 Deploy exams consist of remote access into a live lab built on the same infrastructure an interface as the VMware Hands On Labs.
In the past I provided TestTrack as a remote hands-on simulator for the VCAP DCV/DCA Deploy exam. While that environment was very representative of how the exams ran including scripted results, it was not scale-able.
Introducing the SOSTechBlog VCAP/VCIX Exam Simulation Sample Questions™ which consist of rewording existing HOL labs into a format that reflects how questions are phrased and structured on the exams. This will provide a hands-on experience very similar to taking a Deploy exam and provide walk-throughs and explanations if needed.
Step 0: Create a (free) login at VMware HOL
Step 1: Open the first question for your chosen sample exam (see Question #1 list below).
Step 2: Enroll in the VMware HOL referenced for that question.
Step 3: Resize your screen to 1024x768 and close the HOL manual, leaving the current Question open in a separate tab.
Step 4: Ensure any requirements are met (as stated in the question).
Step 5: Perform the question to the best of your abilities.
Step 6: Refer to the HOL manual for the actual lab referenced for the question to verify your work or answer questions.
Step 7: Repeat 5/6 for all Questions for that exam.
Step 8: Pass the real exam.
Step 9: Profit.
If you have an questions, comments or ideas for questions beyond what is covered in the HOL manuals use the contact form here or find me on Twitter.
VCAP6-NV (VCIX6-NV) Sample Question 1 | SOSTech
In the past I provided TestTrack as a remote hands-on simulator for the VCAP DCV/DCA Deploy exam. While that environment was very representative of how the exams ran including scripted results, it was not scale-able.
Introducing the SOSTechBlog VCAP/VCIX Exam Simulation Sample Questions™ which consist of rewording existing HOL labs into a format that reflects how questions are phrased and structured on the exams. This will provide a hands-on experience very similar to taking a Deploy exam and provide walk-throughs and explanations if needed.
Step 0: Create a (free) login at VMware HOL
Step 1: Open the first question for your chosen sample exam (see Question #1 list below).
Step 2: Enroll in the VMware HOL referenced for that question.
Step 3: Resize your screen to 1024x768 and close the HOL manual, leaving the current Question open in a separate tab.
Step 4: Ensure any requirements are met (as stated in the question).
Step 5: Perform the question to the best of your abilities.
Step 6: Refer to the HOL manual for the actual lab referenced for the question to verify your work or answer questions.
Step 7: Repeat 5/6 for all Questions for that exam.
Step 8: Pass the real exam.
Step 9: Profit.
If you have an questions, comments or ideas for questions beyond what is covered in the HOL manuals use the contact form here or find me on Twitter.
VCAP6-NV (VCIX6-NV) Sample Question 1 | SOSTech
