ipv6 unicast-routing, not working
James777
Member Posts: 20 ■□□□□□□□□□
in CCNA & CCENT
Hi all,
I've trying to do an IPv6 lab for the first time, and when I enter
R1(config)# ipv6 unicast-routing
the router says invalid input, in fact, there's no ipv6 command at all.
System image file is "flash:c2800nm-advsecurityk9-mz.151-4.M10.bin"
is something wrong?
Thanks
I've trying to do an IPv6 lab for the first time, and when I enter
R1(config)# ipv6 unicast-routing
the router says invalid input, in fact, there's no ipv6 command at all.
System image file is "flash:c2800nm-advsecurityk9-mz.151-4.M10.bin"
is something wrong?
Thanks
Comments
-
Magic Johnson
Member Posts: 414
From @theodoxa
"You'll want the Advanced IP Services or Advanced Enterprise package as the packages below that (Advanced Security, IP Voice, IP Base) don't support IPv6.
c2800nm-advipservicesk9-mz.151-3.T4.bin
c2800nm-adventerprisek9-mz.151-3.T4.bin" -
James777
Member Posts: 20 ■□□□□□□□□□
I see, I was wondering if it had something to do with the IOS version...
how can I check if a particular IOS support such and such features?
Cheers