ISIS-Adj: No usable IP interface addresses in serial IIH from ........
Hi Everyone,
Im trying to lab up MPLS/IS-IS/BGP. Hit an IS-IS problem over the frame-relay portion. The Googs is a little thin on useful advice. Any suggestions how to research this:
Pulligny#show int desc | include 1/1.1
Se1/1.1 up up link to Pauillac
*Mar 1 00:42:36.763: ISIS-Adj: Sending serial IIH on Serial1/1.1, length 1499
*Mar 1 00:42:38.531: ISIS-Adj: Rec serial IIH from DLCI 201 (Serial1/1.1), cir type L1, cir id 01, length 1499
*Mar 1 00:42:38.531: ISIS-Adj: No usable IP interface addresses in serial IIH from Serial1/1.1
Pauillac#show int desc | include 1/0.2
Se1/0.2 up up link to Pulligny
*Mar 1 00:44:39.255: ISIS-Adj: Rec serial IIH from DLCI 103 (Serial1/0.2), cir type L1, cir id 00, length 1499
*Mar 1 00:44:39.255: ISIS-Adj: No usable IP interface addresses in serial IIH from Serial1/0.2
*Mar 1 00:44:39.535: ISIS-Adj: Sending serial IIH on Serial1/0.2, length 1499
Thanks!
Node
Im trying to lab up MPLS/IS-IS/BGP. Hit an IS-IS problem over the frame-relay portion. The Googs is a little thin on useful advice. Any suggestions how to research this:
Pulligny#show int desc | include 1/1.1
Se1/1.1 up up link to Pauillac
*Mar 1 00:42:36.763: ISIS-Adj: Sending serial IIH on Serial1/1.1, length 1499
*Mar 1 00:42:38.531: ISIS-Adj: Rec serial IIH from DLCI 201 (Serial1/1.1), cir type L1, cir id 01, length 1499
*Mar 1 00:42:38.531: ISIS-Adj: No usable IP interface addresses in serial IIH from Serial1/1.1
Pauillac#show int desc | include 1/0.2
Se1/0.2 up up link to Pulligny
*Mar 1 00:44:39.255: ISIS-Adj: Rec serial IIH from DLCI 103 (Serial1/0.2), cir type L1, cir id 00, length 1499
*Mar 1 00:44:39.255: ISIS-Adj: No usable IP interface addresses in serial IIH from Serial1/0.2
*Mar 1 00:44:39.535: ISIS-Adj: Sending serial IIH on Serial1/0.2, length 1499
Thanks!
Node
Comments
-
Node Man
Member Posts: 668 ■■■□□□□□□□
Found the solution. Cleaned up the ip addresses in the lab template. Never trust another engineers work!