"Preboot Execution Environment" (PXE) Media test F
AnthonyJD81
Member Posts: 187
in Off-Topic
I am getting a PXE error on bootup. These are the two errors returned:
PXE-E61: Media Test Failure, check cable
PXE-MOF: Exiting PXE
Strike F1 to reboot, F2 for setup utility
I have checked the following but no success:
1.) Disbaled ethernet port in the bios
2.) IDE controllers are enabled and properly indentified ( and connected)
I looked for a PXE remote boot option but didn't see one in the BIOS....I was gonna try and disable it by a recommendation from someone but no luck since its not there.
This maching is a Dell Optiplex with a A10 version BIOS. Anyone have any suggestions to help me situate fix this problem?
Thanks for any help!!!
PXE-E61: Media Test Failure, check cable
PXE-MOF: Exiting PXE
Strike F1 to reboot, F2 for setup utility
I have checked the following but no success:
1.) Disbaled ethernet port in the bios
2.) IDE controllers are enabled and properly indentified ( and connected)
I looked for a PXE remote boot option but didn't see one in the BIOS....I was gonna try and disable it by a recommendation from someone but no luck since its not there.
This maching is a Dell Optiplex with a A10 version BIOS. Anyone have any suggestions to help me situate fix this problem?
Thanks for any help!!!