Cisco CCNA - Chapter 6 #9

Daniel333

Alright, maybe I am just tired but this doesn't seem right to me. Checked errata and no updates for this.

9) In the show ip route command, what code designation implies that a route was learned with EIGRP?

My Answer: D
Their Answer: I

But maybe I am misunderstanding the question, but here is a copy paste straight from a show ip route command... Clearly, it's D!

RouterA#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
* - candidate default, U - per-user static route, o - ODR
P - periodic downloaded static route

Webmaster

Yes, that should clearly be D.

Daniel333 wrote:

Checked errata and no updates for this.

In that case, and if you have latest edition, it think there's an online form you can report it.

Look at the bright side, if they wake you up in a couple of years in the middle of the night asking you what letter in the Cisco routing table indicates a route derived from EIGRP you'll still know it's 'D'.