Call Manager Express + isdn pri
boss
Member Posts: 7 ■□□□□□□□□□
Could anyone assist. Im running Call manager express 3 on a remote router. I have an Isdn pri line using 30 channels for voice. Callers sometimes find isdn lines engaged yet there wont be anyone on the phone. where could my problem be?
Othertime I had a similar problem, but instead of isdn pri, I had 2 voice cards with 4 ports connected. I was getting 7 out of 8 possible simultaneous calls. i had missed out defining ephone-dn for one of the ports as well as putting an overlay for the 2nd button on my ephones (7940).
Thanks in advance
Othertime I had a similar problem, but instead of isdn pri, I had 2 voice cards with 4 ports connected. I was getting 7 out of 8 possible simultaneous calls. i had missed out defining ephone-dn for one of the ports as well as putting an overlay for the 2nd button on my ephones (7940).
Thanks in advance
Comments
-
DaPunnisher
Member Posts: 108
Take a look at your transcoding resources as your DSPs could be hung. Also, you may want to check out this link:
http://www.cisco.com/en/US/tech/tk713/tk628/technologies_tech_note09186a00800a70f3.shtmlGeek Chic! http://www.wegeek.com