Options

Config file

MikdillyMikdilly Member Posts: 309
in CCNA & CCENT
What determines how large your config file can be? Is it the size of NVRAM on the router?
· Share on FacebookShare on Twitter

Comments

  • Options
    rakemrakem Member Posts: 800
    the config file will vary in size depending on how much stuff you have configured...
    CCIE# 38186
    showroute.net
    · Share on FacebookShare on Twitter
  • Options
    dtlokeedtlokee Member Posts: 2,378 ■■■■□□□□□□
    Basically yes. It really shouldn't be a problem but if you did run out of NVRAM, you could load a config from tftp into RAM.
    The only easy day was yesterday!
    · Share on FacebookShare on Twitter
  • Options
    datchchadatchcha Member Posts: 265
    dtlokee wrote:
    Basically yes. It really shouldn't be a problem but if you did run out of NVRAM, you could load a config from tftp into RAM.

    Would it be a wise idea to load every router in an institute from saved config files on a TFTP server?
    Arrakis
    · Share on FacebookShare on Twitter
  • Options
    mikearamamikearama Member Posts: 749
    I don't think that's necessary... but backed up to a tftp server is always a good idea.

    If all devices booted from the tftp server, and the server went down... dayum, you're toast. Same with network connectivity issues.
    There are only 10 kinds of people... those who understand binary, and those that don't.

    CCIE Studies: Written passed: Jan 21/12 Lab Prep: Hours reading: 385. Hours labbing: 110

    Taking a time-out to add the CCVP. Capitalizing on a current IPT pilot project.
    · Share on FacebookShare on Twitter
  • Options
    dtlokeedtlokee Member Posts: 2,378 ■■■■□□□□□□
    datchcha wrote:
    dtlokee wrote:
    Basically yes. It really shouldn't be a problem but if you did run out of NVRAM, you could load a config from tftp into RAM.

    Would it be a wise idea to load every router in an institute from saved config files on a TFTP server?

    Not really,for a number of reasons. What happens if there is no connectivity when trying to obtain the config from the tftp server? TFTP is not a secure protocol so anyone could read the clear text config sent across the network. There's a few others. We used this method for pur customer routers that were located at the customer sites because we didn't want them to be able to preform password recovery and get any sensitive config information.
    The only easy day was yesterday!
    · Share on FacebookShare on Twitter
  • Options
    datchchadatchcha Member Posts: 265
    dtlokee wrote:
    datchcha wrote:
    dtlokee wrote:
    Basically yes. It really shouldn't be a problem but if you did run out of NVRAM, you could load a config from tftp into RAM.

    Would it be a wise idea to load every router in an institute from saved config files on a TFTP server?

    Not really,for a number of reasons. What happens if there is no connectivity when trying to obtain the config from the tftp server? TFTP is not a secure protocol so anyone could read the clear text config sent across the network. There's a few others. We used this method for pur customer routers that were located at the customer sites because we didn't want them to be able to preform password recovery and get any sensitive config information.

    I understand. Thanks!!!!
    Arrakis
    · Share on FacebookShare on Twitter
  • Options
    MikdillyMikdilly Member Posts: 309
    If you did a show ver or show hardware, the amt of memory showing for NVRAM would be the limit for how big your config could be, correct?
    · Share on FacebookShare on Twitter
Sign In or Register to comment.