Options
Second try today FAILED
coax31
Member Posts: 117 ■■■□□□□□□□
in CCNA & CCENT
First try 9/26/2007 618
Planning and Designing 33%
Implementation and Operation 50%
Troubleshooting 44%
Technology 53%
Second try today 720
Planning and Designing 58%
Implementation and Operation 83%
Troubleshooting 55%
Technology 46%
The CCNA is the hardest cert I ever taken A+, Network +, and MCP 70-210 I passed the first time. I keep running out of time during this exam I get down to 2 -3 minutes remaining and still have about 10 questions to go, so I have to rush through them and guess, I still had three questions left when the timer ran down.
I wonder how much harder the 640-802 will be? I think I will buy the Trancenders software in the sybex book for the 640-802 test and hopefully I can get a pass on the third try.
Planning and Designing 33%
Implementation and Operation 50%
Troubleshooting 44%
Technology 53%
Second try today 720
Planning and Designing 58%
Implementation and Operation 83%
Troubleshooting 55%
Technology 46%
The CCNA is the hardest cert I ever taken A+, Network +, and MCP 70-210 I passed the first time. I keep running out of time during this exam I get down to 2 -3 minutes remaining and still have about 10 questions to go, so I have to rush through them and guess, I still had three questions left when the timer ran down.
I wonder how much harder the 640-802 will be? I think I will buy the Trancenders software in the sybex book for the 640-802 test and hopefully I can get a pass on the third try. Comments
-
Options
shednik
Member Posts: 2,005
What have you been using to study with??
What methods have you been using to study?
How much hands on practice did you have? -
Optionsmobri09
Users Awaiting Email Confirmation Posts: 723
It's a tough exam. This was my first Cisco journey and it took me 3 attempts on the 801. Do not be down with yourself. It's ok to fail this...just remember to take a short break and start hitting the books hard again. It sounds like you need a little more experience. How long have you been going after this ? What books you using?
-
Optionscoax31
Member Posts: 117 ■■■□□□□□□□
I studied for 1 month prior each time, ExamCram 2 and Kaplan Learning CCNA 640-801 and Cisco Press CCNA IOS Command Guide. I have a some time with routers at work we have one 3600 and 3 1841s on Wan links, and a 3560 and 3550 switch but I can't do too much with those because they are in production. I setip a little lab with two 2900 XLs and one 1900 switch connected to a spare 3550 and a 3640 router and 1720 router.