labs

Darthn3ss

I know i've asked this before but what do you guys do for labs? I've geot this equipment and for the most of it i've done all the labs in my CCNA 1-4 books - so what should i be doing to make sure i'm on point?

edit: I should probably mention that i'm studying for the 640-801

networker050184

Just implement a network that involves all of the technologies you have learned during your study and make sure it all works the way it is supposed to.

shednik

just like networker said implement various things you've learned, break it, then learn how to fix it.

r_durant

Or, there was a member on here (don't remember his/her name) who said they either look at issues that other member are having and try to simulate and/or fix the problem (that is if you have similar equipment). Even if you don't have similar equipment, there are many ways to simulate the same issue, and there are many issues, problems and uncertainties that members have had on this site...

They also said they sometimes go to www.groupstudy.com and do the same...

But as some have said, it's either imagination, what you get from the reading material, or stuff you get from sites...