loading image in rommon

Aquabat [banned]

Hey, i ran a copy tftp flash on my router and it said Cannot load flash:, and reloaded into rommon . tftpdnld won't work, it keeps saying illegal ip address. This is an older 2612 with no usb interface so how can i load a new image onto it from rommon?

ty

Mrock4

Have you tried Xmodem yet? It's slow as hell, but works pretty well. Make sure everything you're inputting when trying to transfer is perfect. I had such a pain in the butt time trying to do it for a 2600, it turned out I was the one making the error.

dtlokee

you need to set the variables so you can use the tftpdnld command

IP_ADDRESS= <your ip add>
SUBNET_MASK= <your subnet mask>
IP_DEFAULT_GATEWAY = <your default gateway IP>
TFTP_SERVER = <your tftp server ip>

and you need to set the filename, use the "set" command to see what your options are

Aquabat [banned]

im using the ip address 1.1.1.1

ip_address=1.1.1.1

it says missing or illegal ip address in the parameter IP_ADDRESS
but the set command shows everything i have and it's right

dude im not using xmodem it takes foorreevveerr

Mrock4

Aquabat wrote:

dude im not using xmodem it takes foorreevveerr

Hey you asked how. I told you.

dtlokee

It needs to be caps

Aquabat [banned]

hey it works!!! dtlokee have you done this stuff before? ha

netteaser

I loaded an IOS this afternoon using xmodem and yeah it took a long time but it works great

Aquabat [banned]

yea cisco systems needs to develop a better way lol. IF there is a usb interface like on a 2800 then it's easy to just boot from that but wow, rommon is sure a pain in the butt