Problem with Pagent router input

Crunchyhippo

I'm trying to do a simple traffic generation exercise, but when I copy and past the following input (from my exercise) into the Pagent router, I only get the following (for example):

TrafGen(config)#14 dest 22
^
% Invalid input detected at '^' marker.

I had input the following information just previous:

fastethernet 0/0
add tcp
rate 1000
12-dest 001a.6ca1.29a8
13-src 172.16.10.4
13-dest 172.16.20.4
14-dest 23
length random 16 to 1500
burst on
burst duration off 1000 to 2000
burst duration on 1000 to 3000
add fastethernet 0/0 1
14-dest 21
data ascii 0 GET /index.html HTTP/1.1
add fastethernet 0/0 1
14-dest 21
add fastethernet 0/0 1
14-dest 123
add fastethernet 0/0 1
14-dest 110
add fastethernet 0/0 1
14-dest 25
add fastethernet 0/0 1
14-dest 22
add fastethernet 0/0 1
14-dest 6000
end

Needless to say, neither the inbound nor outbound packets are incrementing. Anyone know what's the problem?[/i]

Crunchyhippo

Found the problem. The "1" in the input I copied and pasted is actually an "l." The character is *exactly* the same in the lab book. (How much time did I waste finding this out?!)