Mock NTP server for a Cisco lab

Is there anything I can setup on a microsoft box to run a "mock" ntp server on udp port 123?

I want all the time sync'd on my routers in the lab environment, aslong as the times are the same on the server and routers thats all that matters to me...

Find more posts tagged with

SAVE $250 on Your CISCO Boot Camp — Use Code "EXAM26"

Exclusively for TechExams members for Infosec Boot Camps starting before April 30, 2026

View CISCO Boot Camps

Comments

darkuser

just use a router as your ntp server for all your ntp clients ....

http://www.internetworkexpert.com/resources/01700369.htm

mgeorge

I personally use a small server that hosts DNS, TFTP and NTP.

If you're familuar with linux you should check into Colbat RAQ
If your unfamiluar with linux then it would probably take you awhile to figure it out.
If your a windows guy then find a small desktop, such as a compaq sff pc

Humper

darkuser wrote:

just use a router as your ntp server for all your ntp clients ....

http://www.internetworkexpert.com/resources/01700369.htm

This worked..

Thanks guys!