2948g switch troubleshooting
jamesleecoleman
Member Posts: 1,899 ■■■■■□□□□□
in CCNA & CCENT
I brought the 2948g switch a few days ago but I tested it before I got it but now
when I plug in an ethernet cable into certain ports I won't get a connection.
I've been looking up how to troubleshoot this but I haven't come up with
anything that told me why the ports won't turn green but others do.
When I first powered on the unit the post told me everything was alright.
Now I'm just confused.....
when I plug in an ethernet cable into certain ports I won't get a connection.
I've been looking up how to troubleshoot this but I haven't come up with
anything that told me why the ports won't turn green but others do.
When I first powered on the unit the post told me everything was alright.
Now I'm just confused.....
Booya!!
WIP : | CISSP [2018] | CISA [2018] | CAPM [2018] | eCPPT [2018] | CRISC [2019] | TORFL (TRKI) B1 | Learning: | Russian | Farsi |
*****You can fail a test a bunch of times but what matters is that if you fail to give up or not*****
WIP : | CISSP [2018] | CISA [2018] | CAPM [2018] | eCPPT [2018] | CRISC [2019] | TORFL (TRKI) B1 | Learning: | Russian | Farsi |
*****You can fail a test a bunch of times but what matters is that if you fail to give up or not*****
Comments
-
miller811
Member Posts: 897
Have you looked at the config to determine how the ports are setup?
Are all ports configured identical?
If not, then that may explain why they do not all work the same.
Check the config and report back the results.I don't claim to be an expert, but I sure would like to become one someday.
Quest for 11K pages read in 2011
Page Count total to date - 1283