Home Lab - 2610
sritter
Member Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
I was given a 2610 from my work with a wic-1t serial card and a wic-1bu isdn card.
I can probably get another 2600 series or a 1700 from work and possibly some other equipment. What should I be asking for to complete the lab?
I can probably get another 2600 series or a 1700 from work and possibly some other equipment. What should I be asking for to complete the lab?
Comments
-
empc4000xl
Member Posts: 322
see if you have any switches around. and you want at least 3 routers if you can get your hands on them. 2610 don't have 100mb on them so you can do router on a stick, but you can get the majority of the stuff done, and you can use packet tracer 4 the rest that the 2610 won't cover
-
tiersten
Member Posts: 4,505
You can do router on a stick with the old 2600 routers even if they don't have FE. You need IP Plus and the relevant flash/RAM to support it. dot1q only however.
-
empc4000xl
Member Posts: 322
tiersten wrote:You can do router on a stick with the old 2600 routers even if they don't have FE. You need IP Plus and the relevant flash/RAM to support it. dot1q only however.
I guess there's always a work around.