CCNP lab problem

bbqchickenbbqchicken Member Posts: 1 ■□□□□□□□□□
My Frame relay switch 2522 has gone wrong before few days, here is the list of the problem!


System Bootstrap, Version 11.0(10c), SOFTWARE
Copyright (c) 1986-1996 by cisco Systems
2500 processor with 14336 Kbytes of main memory
Local Timeout (control reg=0x11icon_cool.gif Error, address: 0x2101884 at 0x1076504 (PC)



I changed the RAM and the FLASH already, but the same thing happened.
Is there anyone could help me for this?


thank you so much.

Comments

  • NetwurkNetwurk Member Posts: 1,155 ■■■■■□□□□□
    Could be the Boot ROM chips. If you have any other 2500's, you might want to swap out the ROMs and see if it makes a difference. Just make sure they are identical.
  • tech-airmantech-airman Member Posts: 953
    bbqchicken wrote:
    My Frame relay switch 2522 has gone wrong before few days, here is the list of the problem!


    System Bootstrap, Version 11.0(10c), SOFTWARE
    Copyright (c) 1986-1996 by cisco Systems
    2500 processor with 14336 Kbytes of main memory
    Local Timeout (control reg=0x11icon_cool.gif Error, address: 0x2101884 at 0x1076504 (PC)



    I changed the RAM and the FLASH already, but the same thing happened.
    Is there anyone could help me for this?


    thank you so much.

    bbqchicken,

    Remember that the old FLASH has the IOS on it and the new FLASH does not. So you're going to have to replace the old FLASH back into the router, offload the IOS to a TFTP server, turn router off, exchange the new FLASH for the old FLASH, turn router on, download the IOS from the TFTP server to the router, then you should now have a functioning router.

    I hope this helps.
Sign In or Register to comment.