802.1x Help
Greetings,
I was hoping somebody in here has some experience setting up dot1x authentication on a wired network. I have successfully configured 802.1x in my lab environment but I have another problem. Is there a way to configure 802.1x authentication before logging into Windows? I have set up 802.1x to work using smart card authentication but I have to log into the machine locally, then authenticate through 802.1x, then the domain. I have been searching and can't find any info on this.
Thanks for any assistance.
I was hoping somebody in here has some experience setting up dot1x authentication on a wired network. I have successfully configured 802.1x in my lab environment but I have another problem. Is there a way to configure 802.1x authentication before logging into Windows? I have set up 802.1x to work using smart card authentication but I have to log into the machine locally, then authenticate through 802.1x, then the domain. I have been searching and can't find any info on this.
Thanks for any assistance.
Shoot for the moon. Even if you miss, you'll still land among the stars. - Les Brown
Comments
-
_maurice
Member Posts: 142
probably. when taking the mcse there were questions on using 802.1x authentication with a IAS radius server. go over to the mcse forums, ask over there. -
ubaaoj
Member Posts: 2 ■□□□□□□□□□
Hi IT Man,
I would try changing the smart card to Protected EAP (PEAP) and in your Radius Server select the option that authenticate the machine using PEAP. These are the setting that I am using in my lab, but my lab is winxp pro sp3, cisco acs 4.2 (authentication server), cisco 3560 switch, and win 2003 server.
ubaaoj