Cisco ASA Idle Timeout Question
Daniel333
Member Posts: 2,077 ■■■■■■□□□□
in CCNA & CCENT
I was tasked with checking the timeout on an ASA for a client. I went into enable mode and ran the command
and didn't return any data. So this would mean the timeout on the VPN connection is set to default, right? If so, how long is that? Google hasn't been my friend on this one...
sho run | include vpn-idle-timeout
and didn't return any data. So this would mean the timeout on the VPN connection is set to default, right? If so, how long is that? Google hasn't been my friend on this one...
-Daniel
Comments
-
networker050184
Mod Posts: 11,962 Mod
It should be the default if there isn't anything in a show run.
I'm not sure if there is a show run verbose or something similar on the ASA but you can check the ASA command reference guide for your specific load on Cisco's website.An expert is a man who has made all the mistakes which can be made. -
Daniel333
Member Posts: 2,077 ■■■■■■□□□□
thanks for the reply.
Found it in a random CCSP book on http://books.google.com/ default is 30 minutes is not specified.-Daniel -
networker050184
Mod Posts: 11,962 Mod
Yep, the default and all that information is in the config guide as well. It is always a good idea to keep those around for all the equipment you work with.An expert is a man who has made all the mistakes which can be made.