Options
d-link dir-100 configuration
hi all
we have 25 pc's , I brought router D-link DIR-100 with 4 ethernet ports
we have server with 2 NIC one for WAN with public ip address default gateway DNS , and second for lan Private ip .
I pluged to router to WAN interface , and I changed to 192.168.0.50 , the other NIC pluged to switch .
I did the configuration on router of wan interface lan interface firewall rules ,however I m still could not access to internet !!!!!
we have 25 pc's , I brought router D-link DIR-100 with 4 ethernet ports
we have server with 2 NIC one for WAN with public ip address default gateway DNS , and second for lan Private ip .
I pluged to router to WAN interface , and I changed to 192.168.0.50 , the other NIC pluged to switch .
I did the configuration on router of wan interface lan interface firewall rules ,however I m still could not access to internet !!!!!
Comments
-
Options
impelse
Member Posts: 1,237 ■■■■□□□□□□
1. Set the router with the basic configuration.
2. Make sure that the server can ping the router and the dns is working find (probably the same ip address of the router).
3. After that the servers has to connect to internet (if not disable the interal network card, just for testing).
4. If the server connect to internet you need to share the internet for the rest of the computer and use dhcp.Stop RDP Brute Force Attack with our RDP Firewall : http://www.thehost1.com
It is your personal IPS to stop the attack. -
Options
tiersten
Member Posts: 4,505
No clue what you're trying to achieve here.
You're posting in the wrong forum anyway. -
Options
dynamik
Banned Posts: 12,312 ■■■■■■■■■□
What type of Server? Are you trying to run all the internet traffic through it?
-
Optionsimpelse
Member Posts: 1,237 ■■■■□□□□□□
its the wrong place, but anyway we try to helpStop RDP Brute Force Attack with our RDP Firewall : http://www.thehost1.com
It is your personal IPS to stop the attack.