VGA Cable with only 5 wires inside?
CompuTron99
Member Posts: 542
in Off-Topic
Hi...
I'm trying to replace an end to a 50' VGA cable that the end was damaged. Has anyone seen a 15-pin VGA cable with only 5 wires inside of it?
The end was so damaged, that I cannot tell where the wires were originally. If anyone knows the pinout for this type of cable, it would be alot of help. The cable is used to connect a projector from the the ceiling through an AV jack built into the conference table, so replacing the cable isn't really an option.
Thank you.
I'm trying to replace an end to a 50' VGA cable that the end was damaged. Has anyone seen a 15-pin VGA cable with only 5 wires inside of it?
The end was so damaged, that I cannot tell where the wires were originally. If anyone knows the pinout for this type of cable, it would be alot of help. The cable is used to connect a projector from the the ceiling through an AV jack built into the conference table, so replacing the cable isn't really an option.
Thank you.
Comments
-
vCole
Member Posts: 1,573 ■■■■■■■□□□
-
tiersten
Member Posts: 4,505
RGBHV I assume for your 5 wires. Each of those wires will be a miniature coax with a signal and ground. -
CompuTron99
Member Posts: 542
FadetoBright - Thank you for the links...
tiersten - no, it's a single metal foil shield 1x Red, 1x Green, 1x Blue, 1x White, and 1x Black. I just wasn't sure if some of those are jumpered together. I know (using my multimeter) that pin 1 = Red, Pin 3 = White, Ground = Green, Pin 14 = Black, Pin 13 = Blue. Pin 2 = a broken tip and some solder.
I know that this cable is my no means using any standard of color codes. -
tiersten
Member Posts: 4,505
Hmm... It has odd colour assignments if so. It looks like it is a RGBHV cable still but it doesn't use the coloured wires in a sensible way. You'll just have to work it out from testing with a multimeter or opening the plug.