ios version on a cat 4503
Heya
I managed to get a 4503 for dirt cheap the other day (like 800 bucks), and would like to pimp up the IOS before I sell it to someone else for double or triple the price, atleast. And my gf doesn't like the noise, so I gotta get rid of it
CISCO CATALYST 4500 CHASSIS 3- SLOT
CISCO CATALYST 4500 SUP II PLUS IOS 2 GBIC CONS RJ45
WS-X4548-GB-RJ45
Will this one do the trick?
cat4500-entservicesk9-mz.122-53.SG.bin
Thanks for any input, I appreciate it
cisco4503>sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(1
EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)
TAC Support: Cisco – Shortcut to Technical Support
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 30-Jan-04 02:04 by hqluong
Image text-base: 0x00000000, data-base: 0x010B0624
ROM: 12.1(20r)EW1
Dagobah Revision 90, Swamp Revision 3
cisco4503 uptime is 1 minute
System returned to ROM by reload
System image file is "bootflash:"
cisco WS-C4503 (MPC8245) processor (revision 4) with 262144K bytes of memory.
Processor board ID FOX080903SV
Last reset from Reload
1 Virtual Ethernet/IEEE 802.3 interface(s)
50 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
I managed to get a 4503 for dirt cheap the other day (like 800 bucks), and would like to pimp up the IOS before I sell it to someone else for double or triple the price, atleast. And my gf doesn't like the noise, so I gotta get rid of it
CISCO CATALYST 4500 CHASSIS 3- SLOT
CISCO CATALYST 4500 SUP II PLUS IOS 2 GBIC CONS RJ45
WS-X4548-GB-RJ45
Will this one do the trick?
cat4500-entservicesk9-mz.122-53.SG.bin
Thanks for any input, I appreciate it
cisco4503>sh ver
Cisco Internetwork Operating System Software
IOS (tm) Catalyst 4000 L3 Switch Software (cat4000-I9S-M), Version 12.2(1
EW, EARLY DEPLOYMENT RELEASE SOFTWARE (fc1)TAC Support: Cisco – Shortcut to Technical Support
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Fri 30-Jan-04 02:04 by hqluong
Image text-base: 0x00000000, data-base: 0x010B0624
ROM: 12.1(20r)EW1
Dagobah Revision 90, Swamp Revision 3
cisco4503 uptime is 1 minute
System returned to ROM by reload
System image file is "bootflash:"
cisco WS-C4503 (MPC8245) processor (revision 4) with 262144K bytes of memory.
Processor board ID FOX080903SV
Last reset from Reload
1 Virtual Ethernet/IEEE 802.3 interface(s)
50 Gigabit Ethernet/IEEE 802.3 interface(s)
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Comments
-
niaznishu
Member Posts: 1 ■□□□□□□□□□
Hi Dear
I want to give CCNA exam. Can you please give me guideline and also suggestion how can i go through.
I will be glad to hear from you soon. Thanks
Best Regards,
Niaz -
qplayed
Member Posts: 303
doubt you'll get much for that. I picked up a 6509 for <$1500
If you cannot express in a sentence or two what
you intend to get across, then it is not focused
well enough.
—Charles Osgood, TV commentator -
mens
Member Posts: 69 ■■■□□□□□□□
With 50 gigabit ports? The line card only goes for 2.5k on ebay afaik.
Anyway, would that ios I mentioned work? Wouldn't wanna brick it being the noob that I am. -
tiersten
Member Posts: 4,505
Feature Navigator doesn't list enterprise services as a valid IOS feature set for a Catalyst 4500 with a Sup II Plus.
Latest/greatest for a Sup II Plus is 12.2.53.SG1 IP Base + Crypto. So no, don't load that IOS on it. I doubt you'd brick it but you might end up having to do a painfully slow XMODEM transfer. -
mens
Member Posts: 69 ■■■□□□□□□□
ah thanks tiersten. I totally forgot about the feature navigator, silly me.
-
Forsaken_GA
Member Posts: 4,024
yeah, the chassis are relatively cheap, all things considered. The line cards and the supervisor engines are where the cost is. You can pickup a 6509-E chassis for a fraction of the cost that a Sup720-3B(X|C)L with dCef linecards will cost.
