Will a NM-1FE-TX work in a 2650xm
rc51boss
Member Posts: 27 ■□□□□□□□□□
in CCNA & CCENT
I found this document saying that it wouldn't
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/3600m_ds.pdf
Then I found this
https://supportforums.cisco.com/thread/149564.pdf;jsessionid=E707C9855C3D81E5D8EFB6D9A0A8D555.node0
Can anyone actually confirm or deny this.
Thanks
http://www.cisco.com/warp/public/cc/pd/rt/3600/prodlit/3600m_ds.pdf
Then I found this
https://supportforums.cisco.com/thread/149564.pdf;jsessionid=E707C9855C3D81E5D8EFB6D9A0A8D555.node0
Can anyone actually confirm or deny this.
Thanks
Comments
-
tiersten Member Posts: 4,505A NM-1FE-TX should work in a 2600XM even though it isn't listed as being supported. It uses the same Ethernet controller as the built in Ethernet interfaces so the driver is already present in IOS. As it isn't actually on the official list, YMMV.
Don't bother putting in any of the combo NMs that have a Ethernet + something else though. They won't work at all. -
tazdevil Member Posts: 55 ■■□□□□□□□□I have one working in my 2650XM with out any issues, but again this does not mean it's supported.ICND1 - Passed March 19/2010
ICND2 - Passed April 8/2010