ASA and NAT
trackit
Member Posts: 224
Hey!
Is it possible to make ASA to NAT to different addresses based on the destination?
lets say, if traffic is destined to 10.0.0.0/8 then send it out "this" interface and NAT it to this address and if traffic goes to all other destinations then send it out "that" interface and NAT it to other address...
Is it possible to make ASA to NAT to different addresses based on the destination?
lets say, if traffic is destined to 10.0.0.0/8 then send it out "this" interface and NAT it to this address and if traffic goes to all other destinations then send it out "that" interface and NAT it to other address...
Comments
-
fightclub34
Member Posts: 41 ■■□□□□□□□□
would policy nat work. Nat the traffic to a different ip address before it gets outside -
Ahriakin
Member Posts: 1,799 ■■■■■■■■□□
Which interface it will use is purely down to the normal routing table, you can't specify the next hop as you could with PBR on a router, just manipulate your static routes to achieve the result.
For NAT yup policy NAT will do the trick (Easiest is a Static-NAT linked to an ACL).We responded to the Year 2000 issue with "Y2K" solutions...isn't this the kind of thinking that got us into trouble in the first place?