viewing egress queues

rakem

Hi,

See this link
Catalyst 3750 Switch Software Configuration Guide, 12.2(50)SE - Configuring QoS [Cisco Catalyst 3750 Series Switches] - Cisco Systems

table 36-11 shows the Default DSCP Output Queue Threshold Map.

Is there a command which shows this on a 3560? I can't seem to find any commands which show which DSCP values are matched to which output queue.

Also the document above is for 3750s. Anyone know if the default values in the table apply to 3560s? I would think they would be the same.

Thanks.

rakem

for anyone thats interested its;


switch#show mls qos maps

it gives yous a bunch off stuff, all ii was interested in was the following;

   Dscp-outputq-threshold map:
     d1 :d2    0     1     2     3     4     5     6     7     8     9 
     ------------------------------------------------------------
      0 :    02-01 02-01 02-01 02-01 02-01 02-01 02-01 02-01 02-01 02-01 
      1 :    02-01 02-01 02-01 02-01 02-01 02-01 03-01 03-01 03-01 03-01 
      2 :    03-01 03-01 03-01 03-01 03-01 03-01 03-01 03-01 03-01 03-01 
      3 :    03-01 03-01 04-01 04-01 04-01 04-01 04-01 04-01 04-01 04-01 
      4 :    01-01 01-01 01-01 01-01 01-01 01-01 01-01 01-01 04-01 04-01 
      5 :    04-01 04-01 04-01 04-01 04-01 04-01 04-01 04-01 04-01 04-01 
      6 :    04-01 04-01 04-01 04-01 

quote from a cisco doco:

"The d1 column specifies the most-significant digit of the DSCP number. The d2 row specifies the least-significant digit in the DSCP number. The intersection of the d1 and the d2 values provides the queue ID and threshold ID"

easy!