what is the 3rd router i need in my lab
jeff113
Member Posts: 44 ■■□□□□□□□□
in CCNA & CCENT
I ordered off of ebay
3 2950 24 port switches
2 cisco 2620xm with 128D/48F CISCO2620XM /w WIC-1DSU-T1
What is needed for my 3rd router. I want to be able to configure frame-relay and do more labs. Thanks
3 2950 24 port switches
2 cisco 2620xm with 128D/48F CISCO2620XM /w WIC-1DSU-T1
What is needed for my 3rd router. I want to be able to configure frame-relay and do more labs. Thanks
Comments
-
alan2308 Member Posts: 1,854 ■■■■■■■■□□You've gotten yourself some pretty good routers, so you can get away with just about anything as a third router. Connect the two routers you have with a t1 cross over cable and use one as your frame relay switch. Then I'd grab a 2500 series router, a back to back serial cable, and a WIC-1t module for the FR switch. All three combined will probably be less than $50 and will get the job done.
Edit: Also, take a look at cablesandkits.com as well as ebay. They have free shipping on orders over $25 which can really help the overall cost. -
jeff113 Member Posts: 44 ■■□□□□□□□□any other suggestions? and do i need a t1 cross over cable to do frame relay
-
alan2308 Member Posts: 1,854 ■■■■■■■■□□any other suggestions? and do i need a t1 cross over cable to do frame relay
If you want to use the T1 cards that come with the routers you bought, then yes, you need a T1 crossover to connect them for any reason. -
jeff113 Member Posts: 44 ■■□□□□□□□□where do i get t1 cross over cables from. i didn't see them on ebay. and is that all i need to do frame relay
-
xenodamus Member Posts: 758If you have any experience making cables, it uses the same RJ-45 end, just a different pinout.
I typed "t1 crossover cable" in an ebay search and got several results, though.CISSP | CCNA:R&S/Security | MCSA 2003 | A+ S+ | VCP6-DTM | CCA-V CCP-V -
tech-airman Member Posts: 953I ordered off of ebay
3 2950 24 port switches
2 cisco 2620xm with 128D/48F CISCO2620XM /w WIC-1DSU-T1
What is needed for my 3rd router. I want to be able to configure frame-relay and do more labs. Thanks
jeff113,
What are the requirements for frame-relay?