OSPF - Packet Tracer Problems
Jay4Cisco
Registered Users Posts: 1 ■□□□□□□□□□
in CCNA & CCENT
Hi All,
Seem to be having a few problems running OSPF in packet tracer. Particularly creating neighbours between routers.
Please, please take a look at the configs and tell me what I’m doing wrong. I have been staring at this for about 6 hours now and it's driving me insane.
CBT-Full-Lab.pkt - 4shared.com - online file sharing and storage - download
Thanks!
Jay
CCENT
Seem to be having a few problems running OSPF in packet tracer. Particularly creating neighbours between routers.
Please, please take a look at the configs and tell me what I’m doing wrong. I have been staring at this for about 6 hours now and it's driving me insane.
CBT-Full-Lab.pkt - 4shared.com - online file sharing and storage - download
Thanks!
Jay
CCENT
Comments
-
mikej412
Member Posts: 10,086 ■■■■■■■■■■
You might want to get your Router on a Stick working between R2 and S3 first. Routers don't support DTP, so you have to manually configure the switch port for trunking.... R2 should be able to ping the admin IP on S3 if you have everything configured correctly.
And then you may want check your subnet/VLAN mappings. If your ROAS was configured correctly, R3's FA0/0.20 in VLAN 1 on the 192.168.20.0/24 network would still NOT be able to talk to R1's FA0/0 192.168.1.0/24 network on VLAN 1.:mike: Cisco Certifications -- Collect the Entire Set!