In Band Management on EX?
kronicklez
Member Posts: 40 ■■□□□□□□□□
in Juniper
Hi all expertise,
Need your advise regarding inband management on EX. Currently i think to use inband management (default vlan) to manage all my Access switch using EzSetup. My question do we need to put that default vlan also in trunk port at both site? I already test it but fail to ping or telnet other device. If i just connect both device without trunk it success. Need your advise. Thanks n appreciate.
set interfaces xe-1/1/0 unit 0 family ethernet-switching vlan members [Stat-VlanFlr2 DHCP-VlanFlr2 Access-Card UPS-Vlan]
Need your advise regarding inband management on EX. Currently i think to use inband management (default vlan) to manage all my Access switch using EzSetup. My question do we need to put that default vlan also in trunk port at both site? I already test it but fail to ping or telnet other device. If i just connect both device without trunk it success. Need your advise. Thanks n appreciate.
set interfaces xe-1/1/0 unit 0 family ethernet-switching vlan members [Stat-VlanFlr2 DHCP-VlanFlr2 Access-Card UPS-Vlan]
Comments
-
kronicklez
Member Posts: 40 ■■□□□□□□□□
Hi all,
Is anyone experience in configuring inband management for EX? -
IOS2JUNOS
Member Posts: 56 ■■□□□□□□□□
do you also have the L3 vlan interfaces created and associated with L2 vlans?
-
kronicklez
Member Posts: 40 ■■□□□□□□□□
Hi all,
thanks for all reply. Currently problem has been solved. If we using EZSETUP it dont' automatically created vlan-id for vlan default. We need to assign it later. Thanks..