FXO to multiple extensions/ports

rcraig114

I have a 1760 with a FXO module and FXS module. I also have a good ole 7941 sitting on my desk. I have my home analog phones connected via one of my FXS ports and my OOMA connected via FXO. Calls flow through from OOMA to my analog or I can do the same thing in reverse by pressing 9 from IP Phone or Analog to get outside line. My question is, is there any way possible to have incoming calls ring on my analog phones as well as my IP Phone? I tried changing the number of second button on my IP Phone, but when calls came in, they only rang on the IP Phone. From my understanding, CME 4.1 doesn't support parallel hunt groups. Can someone point me in the right direction? Any help is appreciated. Thanks!

pitviper

See if the 1760 platform / CME version supports STCAPP - If so, you can make the FXS ports function as if they were SCCP IP phones and assign the same DN/button to all phones.

http://www.techexams.net/forums/ccvp/61085-stcapp-fxs-ports.html

pitviper

Well, scratch that - I just checked and STCAPP is supported on ISR platforms and above.

You can always have all incoming calls ring the IP phone, and then just call forward the line to the analog phone DN when you aren’t at the desk.

rcraig114

Any other way of doing it?