3640 Rommon Memory Issue.

marcnotrustmarcnotrust Registered Users Posts: 3 ■□□□□□□□□□
in CCNP
Hi Guys,

Just wondering if anyone can help with this at all.

I have just picked up to 3640's, both of which have an IOS image that requires more than 64mb ram that the routers have, so boot process loops.

Any idea how I can erase the flash from Rommon so I can xmodem a smaller image on them etc.

Cheers,
Marc
· Share on FacebookShare on Twitter

Comments

  • DPGDPG Member Posts: 780 ■■■■■□□□□□
    rommon 1> format flash:


    Do you have a PCMCIA card that you copy copy the IOS to? That would be way faster than using xmodem.
    · Share on FacebookShare on Twitter
  • cuuloco10cuuloco10 Member Posts: 38 ■■□□□□□□□□
    if you face the worst case scenario of using xmodem, change the baud rate to 115K instead of the default 9600. And too bad the tftpdnld command is not available.

    Good luck ! i have a similar issue with 3640 that i m trying to bring back to life.
    · Share on FacebookShare on Twitter
  • esswokesswok Member Posts: 74 ■■□□□□□□□□
    is the memory embeded to the MOBO? Can you take mem from one unit, add it to the other to double the mem then downgrade you IOS?
    · Share on FacebookShare on Twitter
Sign In or Register to comment.