GBIC Question (3550) WS-G5483

flipmadflipmad Member Posts: 184
in CCNP
I just plugged 1000 Base-T WS-G5483 GBIC's. The logs recognized the GBICS

00:09:43: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul
e is detected in Gi0/1. Speed and duplex will be autonegotiated
00:10:01: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul
e is detected in Gi0/2. Speed and duplex will be autonegotiated
00:10:09: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul
e is detected in Gi0/3. Speed and duplex will be autonegotiated
00:10:16: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul
e is detected in Gi0/4. Speed and duplex will be autonegotiated
00:10:24: %GBIC_1000BASET-6-GBIC_1000BASET_DEFAULT_CONFIG: 1000-BaseT GBIC modul
e is detected in Gi0/5. Speed and duplex will be autonegotiated

Even in the show interface, I am showing 1000BaseT module (WS-G5483) in GBIC slot

But if I try to plug a working cable or ethernet loopback plug into the port, I dont get anything

Currently, I have a ethernet loopback plug into interface gig0/1 and it is down/down

GigabitEthernet0/1 unassigned YES unset down down


Running the following IOS

flash:c3550-i5q3l2-mz.121-22.EA4/c3550-i5q3l2-mz.121-22.EA4.bin

What am I missing here?
· Share on FacebookShare on Twitter

Comments

  • flipmadflipmad Member Posts: 184
    I guess it was my loopback plug.. It works at 100, but when I put it into Gbit ports it doesnt recognize it. I used a cross over cable from a working Gbic port to the GBIC and it came up
    · Share on FacebookShare on Twitter
Sign In or Register to comment.